Instructions / Assembly

www.jakob-usa.com
Toll Free 866 215 1421
[e-mail]
Installation Instructions for Individual Wire Rope Trellis
Part #30790-0001
Parts List:
1. - 6 qty, Stainless steel rod 4” long. 5/32” diameter.
2. - 1 qty, Stainless steel cables 98 7/16” long. 5/32” diameter.
3. - 2 qty, Spacers.
4. - 2 qty, Tensioners.
5. - 2 qty, Plastic anchor (for concrete/masonry)
6. - 2 qty, Screw.
7. - 6 qty, plastic cross clamps.
Tools Needed:
8. Safety glasees
9. Step Ladder
10. Pencil.
11. Measuring tape.
12. Level.
13. Plumb bob.
14. Electric drill.
15. Hammer
16. Exterior grade sealant & caulking gun.
17. Cable cutter or electric grinder or Dremel tool with cutting disk.
Please refer to Installation Details diagram during installation.
**IMPORTANT: Never attach trellis to vinyl siding, Dryvit or other synthetic or natural construction material.
Walls where integrity is uncertain or where possible penetration of a moisture barrier membrane may create
A potential for water leakage or damage or may violate and void any product warranties. Be sure to carefully seal
any wall penetrations with the proper sealant materials.
Consult a construction expert for advice on your specific conditions.
QUESTIONS: 1866 215 1421 EMAIL: [e-mail]