DSP Color CCD Cameras CV-S3200/3300 Operation Manual (Rev.
CV-S3200/3300 DECLARATION OF CONFORMITY AS DEFINED BY THE COUNCIL DIRECTIVE 89/336/EEC EMC (ELECTROMAGNETIC COMPATIBILITY) WE HEREWITH DECLARE THAT THIS PRODUCT COMPLIES WITH THE FOLLOWING PROVISIONS APPLYING TO IT.
CV-S3200/3300 Table of Contents CE declaration ........................................................................................................... 2 1. General .................................................................................................................. 4 2. Main features ........................................................................................................ 4 3. Standard composition.........................................................................
CV-S3200/3300 1. General The CV-S3200/3300 is a new high-resolution color camera series, available in PAL or NTSC format. The camera series was developed with JAI's new DSP processor, which has remarkable high signal to noise ratio as well as a high bit flow. The cameras also have built-in RAM, which together with the DSP enables the camera to produce field integration with 100% horizontal resolution.
CV-S3200/3300 3. Standard compositions 1) 2) 3) 4) 5) Camera main body C-mount adaptor (MP-55) Auto iris lens pulg (E4-191J-100) Y/C out plug (TCP8040-01-520) Operation manual x1 x1 x1 x1 x1 4. Pin assignment 4-1. DC IN/SYNC/RS-232C connector a) 9 pin D-sub connector for CV-S3200 4-40 UNC Thread 1 2 3 4 5 6 7 8 9 : : : : : : : : : Ground +12V DC input Ground VBS output Sync input Y output C output TXD output RXD input 1 2 3 4 5 6 7 : : : : : : : RXD input TXD output Ground Sync.
CV-S3200/3300 4-2. S-VIDEO connector 1 2 3 4 : : : : Ground Ground Y output C output 1 2 3 4 : : : : +9V / DampNC / Damp+ Iris / Drive+ Ground / Drive- 4-3. LENS connector 5. Functions and operations 5-1. SW1 switch on PK8167 board This switch is to select the type of auto iris. It is located on the CCD board (PK8167), as below. Up : Direct drive mode (Passive) Down : Video controlled (Active) SW1 switch Note : Factory pre-set is Video controlled.
CV-S3200/3300 5-2. On-screen-menu On-screen-menu can be controlled by the “UP”, “DOWN” and “FUNC” switches on the rear panel. 5-2-1. Functions The following functions are adjustable at on-screen-menu. White balance Shutter Gain Back light compensation Lens iris Gamma Scanning reversal Sensitive (Field integration) a) White balance This function is to adjust the color temperature to make the color of the image correct. 3200 K : For incandescent lamp or halogen lamp. 4600 K : For white fluorescent lamp.
CV-S3200/3300 b) Shutter This function is used for “freezing” objects and for light regulations. Nine exposure time settings are available. OFF : 1/60 sec. (NTSC), 1/50 sec. (PAL) Selectable shutter : 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000 sec. Flicker-less : 1/100 sec. (NTSC), 1/120 sec. (PAL) CCD iris : Shutter speed changes automatically. (1/60 sec. to 1/10000 sec. (NTSC), 1/50 sec. to 1/10,000 sec.(PAL)) Note : Factory pre-set is OFF. CAUTION 1.
CV-S3200/3300 d) BLC (Back Light Compensation) BLC circuit will c0mpensate for extreme highlights in the field of view. There are three pre-defined patterns that can be selected. These are shown below. The higher the value, the more backlight compensation. 1 4 1 9 1 Patten 3 Patten 2 Patten 1 0 4 0 1 0 15 0 0 0 0 0 0 10 4 0 4 Note : Factory pre-set is OFF. CAUTION 1.
CV-S3200/3300 f ) Gamma This function is to set the gamma correction. 0.45 : Correction : Correction : Linear 0.6 1.0 Note : Factory pre-set is 0.45. g) Scanning reversal (mirror-effect mode) This function can change the horizontal scanning between normal and reverse. OFF ON : Normal scanning : Reversal scanning Note : Factory pre-set is set at OFF. h) Field integration The sensitivity can be set at these pre-set positions.
CV-S3200/3300 (a) To start adjustment, push the “FUNC” button. The menu will appear on the monitor . (See page 12) (b) Use “UP” or “DOWN” buttons to choose functions. To select function, press the “FUNC” button. (c) After selecting the function, press “UP” or “DOWN” buttons to choose mode. To select mode, press the “FUNC” button. (d) To use One Push White Balance. Go to the next function if needed, and repeat (b) to (c). 1. Change to White Balance mode by Function SW. 2.
CV-S3200/3300 6. External appearance Unit : mm (inches) e.g. CV-S3200 4-40 UNC Thread e.g.
CV-S3200/3300 7. S pecifications Specifications Model name CV-S3200 CV-S3300 TV standard NTSC / PAL NTSC / PAL Scanning system CCD sensor Effective pixels Cell size NTSC : 525 lines, 30 frames/sec. PAL : 625 lines, 25 frames/sec. Color 1/2" IT CCD sensor Color 1/3" IT CCD sensor NTSC : 768 (h) x 494 (v) PAL : 752 (h) x 582 (v) NTSC : 8.4 (h) x 9.8 (v) µm PAL : 8.6 (h) x 8.3 (v) µm Resolution (horizontal) NTSC : 6.35 (h) x 7.4 (v) µm PAL : 6.3 (h) x 6.25 (v) µm 450 TV line Sensitivity 0.
CV-S3200/3300 8. Appendix 8-1 Precautions Personnel not trained in dealing with similar electronic devices should not service this camera. The camera contains components sensitive to electrostatic discharge. The handling of these devices should follow the requirements of electrostatic sensitive components. Do not attempt to disassemble this camera. Do not expose this camera to rain or moisture. Do not face this camera towards the sun, extreme bright light or light reflecting objects.
CV-S3200/3300 9. User’s Record Camera type: CV-S3200/3300 Revision: (Revision B) Serial No. .................
2700-21107 E B1 0701 JAI A·S, Denmark Produktionsvej 1, 2600 Glostrup Copenhagen, Denmark Phone +45 4457 8888 Fax +45 4491 8880 www.jai.com JAI Corporation, Japan German Industry Center 1-18-2 Hakusan, Midori-ku Yokohama, Kanagawa 226-0006, Japan Phone +81 45 933 5400 Fax +81 45 931 6142 www.jai-corp.co.jp JAI America, Inc., USA Suite 450 23046 Avenida de la Carlota Laguna Hills, CA 92653 USA Phone +1 949 472 5900 Fax +1 949 472 5908 www.jai.
