Manual

3
1.2 SWITCHING-ON THE TUNING SET.
Switch on the Tuning Set with the slide switch on the right side of the Tuning Set. For approx. one
second you see the program version, and then the following indication:
>1< TUNING ->
Should one of the next two indications appear, please go to the next paragraph.
>1< STIMMEN -> >1< ACCORDER ->
1.3 SELECTION OF LANGUAGE FOR OPERATOR GUIDANCE
Your Tuning Set can converse with you in German, French, or English. Select the desired
language as follows:
1. Turn off the Tuning Set.
2. While with the left hand depressing and holding the key "S", switch on the Tuning Set.
Continue depressing the key "S" until you see a rotating display of the letters D, F, and GB.
For German, press the key "E", while "D" is being displayed.
For French, press the key "E", while "F" is being displayed.
For English, press the key "E", while "GB" is being displayed.
From then on the operator guidance language displayed by the Tuning Set is in the language you
have selected. Switching the Tuning Set on or off does not change the language.
1.4 INTRODUCTION TO THE DIAGRAM FOR MODES OF OPERATION
The Tuning Set is basically operated with the keys "<", ">", and "E". With the basic keys you can
find your way through the included Diagram for Modes of Operation, like on a 'city map'. You are
now, after turning on the Tuning Set, in the upper left hand corner, shown by the big black arrow.
With the keys "<" and ">" you can move to the left and right, and select one of the following modes:
>1< TUNING Tuning with the strobe display
>2< PITCH Mode for standard pitch adjustment
>3< CENTMESS Measuring or adjustment of a tone in cent
>4< TEMPERATURE Mode for historical temperaments
>5< STRETCHING Mode for tuning pianos
>6< INTERVAL Mode for tuning of pure intervals (CTS-5-P and PE only)
>7< STORAGE Storage of piano tunings and temperatures (CTS-5-P and PE only).