Manual

1. Switch off the device.

2. Hold key "A" pressed, while switching on the device, and keep it pressed until the following

display appears:

SWITCH ON MODE

changing 1...5 1

You can now select the mode number which is to appear when the device is switched on. If you

need for example mode 2 "PITCH", press key "E" when the number "2" is displayed. Then the

device will change automatically to the next function:

AUTOMATIC LIMIT

change ON,OFF ON

Here you can switch off the mechanism which limits the automatic tone-switching function to two

semi-tone steps. We would advise you, only to switch this off, when musical intruments with a

dominating fundamental tone are to be tuned (for example recorders). To switch the limit off, press

key "E" at the moment when "OFF" is displayed. To switch it on press key "E" at the moment when

"ON" is displayed. Then the device will change automatically to the next function:

TIME SWITCH OFF

change ON,OFF ON

On: If you don't use the set for twenty minutes, it will automatically turn off. Off: No timer switch

will be active. Next display:

LED'S +- CENTS

changing 2; 4; 8; 16; 32 2

Here you can adjust the precision of the good\bad indicator LED's. For example if you want a

precision of ñ8 cent, you press key "E" at the moment when "8" is displayed.

Now that all adjustments are made, so the Tuning Set switches to the normal user mode.