Manual

14
Now select a memory by tapping key "<" or ">".
Available in CTS-5-P and PE:
MEMORY S-01 to S-03 for stretchings
MEMORY T-01 to T-12 for temperaments
In the exchangeable memory module (CTS-5-PE only):
MEMORY SE-04 to SE-15 for stretchings
MEMORY TE-13 to TE-32 for temperaments
In this example we will store a piano tuning into "MEMORY S 02". We therefore search for this
display with the keys "<" and ">" :
MEMORY S-02 M02
>7< SET MEMORY
"MEMORY S-02" is now selected. By tapping key "E" this memory becomes active. The device
switches its tone automatically to "a'", and enters the "SET PITCH" mode:
a 1 PITCH 440.00
>7< SET PITCH
Now we have to calibrate the Tuning Set's standard pitch to the standard pitch of the musical
instrument. You therefore have to measure the standard pitch (as in example 2.3).
This calibration should be done very carefully. The stroboscopic display must come to a complete
stop when the tone a' is played on the musical instrument. The exact calibration is very important
because all cent deviation values to be stored will relate to this standard pitch.
When this mesurement is finished, press key "E". The device will enter the "SET NOTE" mode:
A 2 SET NOTE
>7< CENTS: 00.0
The Tuning Set automatically switches to the tone A 2, the deepest tone.
With the keys "<" or ">" you can select the tone to be to stored, but please do not use these keys
yet! Press key "E"; the Tuning Set will enter the "SET CENT" mode:
A 2 SET CENT
>7< CENTS:00.0