Manual

The Tuning Set is now tuned a pure quint higher. You may start tuning.

(The frequency of the current pitch is 440Hz*3/2).

When you use the interval program please note that the tuning area (27.5 Hz through 6645 Hz)

cannot be expanded through the interval function. The Tuning Set cannot be set outside this

range.

2.8 STORAGE OF STRETCHINGS AND TEMPERAMENTS (CTS-5-P and PE only)

To refresh your already considerable knowledge of the CTS-5...

Stretchings are functions, which encompass the entire tone range of an instrument. For each tone

(spanning its entire range) in the Tuning Set there is a cent value. One stretching therefore

contains storage space for a total of 8*12=96 CENT values. You may input three such stretchings

into the Tuning Set. Each exchangeable storage module of the CTS-5-PE contains additional

storage space for 12 stretchings. On the other hand, a temperament relates only to the 12 semi-

tones of an octave, and therefore only contains 12 cent values. These cent values are then

repeated for each octave, considering that the cent deviation for the tone "a", as program-

necessitated, is always zero (See Function of cent Relationship and Transposition in Part 3.4 of

the operating instructions). You may input 12 such temperaments into the CTS-5-P. The

exchangeable storage module of the CTS-5-PE contains additional storage space for 20 additional

temperaments.

You can combine the stored stretchings with temperaments, or built-in functions, as you please. If

you select a temperament and a stretching at the same time, the Tuning-Set will add the

temperament cents to those of the stretching.

Your temperaments and stretchings will be stored permanently, even if you remove the batteries.

To quickly familiarize yourself with the memory functions, follow the examples on a musical

instrument. Use the included "Diagram for Memory Mode" to find your way through the menus.

Switch on the Tuning Set and select mode Number 7 "MEMORY ->". After tapping key "E" this

message will appear (in 3 stages):

ATTENTION, MEMORY WILL BE WRITTEN GO AHEAD: A + E

You can still leave the memory mode without changing the memory, by tapping key "<" or ">".

You can leave the memory mode at any time, by pressing keys "S" and "E" simultaneously.

Go ahead by pressing key "A" and "E" simultaneously:

memory number

kind of memory

(Mode "SET MEMORY") MEMORY S-01 M01

>7< SET MEMORY