Operation Manual
31
DE FR ENEN
Enter the advanced function setting: Press the to switch off the thermostat,Display
will show “OFF”. Press again, it will turn on. Please press Key in next second, it will
into the advanced function setting. You can press to switch the system parameters. At
the same time, press the or with the parameters to modify settings. Select a set of
content. If you do not by the or , the parameters will not modied. If you want to save
the data, you must go through all the functions and exit the system menu.
advanCed funCtion setting
Warning: System setting is used to set some important parameters of the system, that’s
only for professionals. Do not make any improper modication. The item already been
debugged and tested by professionals, there is no need to reset.
The thermostat’s display type is LCD segment displaying. There are some different for
the display value and practical value.Please refer to the specic gure:
The system parameters according to the following order:
AdJ>PrG>LtP>SEn>t0P>dt0>dt1>bL>Sat>dEF