Operation Manual
30
DE FR ENEN
The automatic default mode of the machine factory is 5+2 mode. Time specic data see
the following table. You can modify when you enter the programming interface:
5+2 mode id p1 p2 p3 p4 p5 p6
monday to friday start time 06:00 08:00 11:30 12:30 17:00 22:00
set value 22°C 15°C 15°C 15°C 22°C 15°C
saturday to sunday start time 06:00 08:00 11:30 12:30 17:00 22:00
set value 22°C 15°C 15°C 15°C 22°C 15°C
For example: in the automatic mode, when the system time for the Friday 08:20, display
will show: WEEK 5 or STAGE 2 and the setting temperature value of 15 degrees.
Press the for 5 seconds, you will enter into the period setting interface. The number
is blinking in WEEK area, it means the mode of your set (5+2 or 6+1 or 7). You can
press button to select the object you want to modify (the period start time: hours,
minutes and set temperature). Press or to modify the value. If you want to turn off a
period, please press until the OFF shows.
For example: in the 5+2 mode, the period setting sequence:
Press 5s, the week area will blinking 1-5, Reference on the right Image
P1:hr>min>setting value-> P2:hr>min>setting value->
P3:hr>min>
setting value->…-> P6:hr>min>setting value: The week area will
auto change 6-7 and blinking.
P1:hr>min>setting value-> P2:hr>min>setting value->
P3:hr>min>setting value->…->P6:hr>min>setting value
Total setting value is 12 sets (<5>P1-P6,<2>P1-P6), you will setting 12X3 values. If you
want skip the setting item you can press , You can use the to back to the previous
setting.