Operation Manual
29
DE FR ENEN
display three types of temperature
How to set the system time: Keep pressing for 5 seconds,it will enter into the time
setting. The current revisable object will ash and display. Press and choose time you
want to revise (week / hour / minute), press or to modify the current setting. If you
need to modify the previous parameters, please press key. After the modied minutes
you can press to exit the system clock settings.
Press you can choose the manual mode or automatic mode.
Manual mode: System will control temperature under the set value without any change.
Automatic mode: System would control temperature according to the preset
temperature values in different time. The icon will lit, which means that the system
is running under automatic mode. The week and Stage icon would alternately display
every 5 seconds, 1-7 is systematic reuse. When screen shows WEEK, 1-7 would display
the values of the week. When screen shows STAGE, 1-6 would display the current values.
The thermostat can’t quit when you set the periods and it will automatically save data
and exit when all setting is nished.
The periods setting can realize the control of temperature and time under automatic
mode. Once setting up, the values could be saved and reused in the thermostat forever.
The thermostat can save three kinds of schedules (5+2 / 6+1 / 7) in 6 periods; One week
for a cycle.
Each data is saved as the start time (hours: minutes) and the temperature values of this
period. The end time of the period would be saved as the start time of next period. You
can also shut down a certain period according to your needs.
system time
automatiC / manual sWitCh
setting the periods of time modes