Instructions

34. Zone 1~6 Output Connector
6 zone outputs with terminal connectors. The maximum voltage of these outputs is 100V.
31. Speaker Output Connector With Pole
3 direct speaker outputs with pole connectors. These poles contain: COM, 4~16 , 70V and 100V.
32. Dc 24v In
Outside DC 24V input connector with 2 terminals.
35. Ac Power Input Connector With Fuse
Connect the POWER INPUT CONNECTOR to an electrical outlet by a power cord. This PA-amplifier can be
supplied with the AC127V/60Hz power.
33. Dc24v Fuse Holder
Rating power
Mic input
Line input
Model
AC FUSE
300 mV, 10k ohm
5 mV, 600 ohm
180W RMS
5A/250V
DC FUSE
20A/250V
350W RMS
7A/250V
25A/250V
PAP-180 PAP-350
A fuse in this fuse holder for DC24V power supply.
450W RMS
7A/250V
30A/250V
PAP-450
30. Mp3/aux3 Button
A button for changing input source to Mp3 player or Aux3.
23. A Group Of Send And Return
Connect SEND(RCA socket) connector to an external device for sending output signal to that device.
Connect RETURN(RCA socket) connector to an external device for accepting signal from that device.
If you don not use an external device, please connect SEND and RETURN for short-circuit.
24. Preamp Out
The PREAMP(previous amplifier) OUTPUT with XLR-M socket provides signal to a cassette deck or home
audio equipment.
21. Aux2 Input
The AUX2 input (with RCA sockets) allows cassette recorder or CD player and sent to the Main output.
22. Aux3 Input
The AUX2 input (with RCA sockets) allows cassette recorder or CD player and sent to the Main output.
26. Mic2/Line1 Button
A button for changing input source between Mic2 and Line1.
27. Mic3/Line2 Button
A button for changing input source between Mic3 and Line2.
28. Mic4/Aux1 Button
A button for changing input source between Mic4 and Aux1.
25. Mute Control
Adjusting the Mute Control to increase or decrease other input channels volume when MIC1 working.
29. Mic5/Aux2 Button
A button for changing input source between Mic5 and Aux2.