Instructions

ManualsBrandsjade Manualspower amplifierJADE PAP-180 Public Address Power Amplifier

Table Of Contents

5 MIC inputs, 2 LINE inputs and 3 AUX inputs, 1 Pre-amp output, 1 group of Aux Send and Aux Return

MIC1 input with priority-function, automatically mute other input

Main volume control, treble and bass adjustors

Power, fault, signal and peak indication, 5-segments signal level indication

Built-in Mp3 player with Bluetooth

Protection: turn on delay, over current, over heating, short-circuit protection and limit

6 zoning output with separate volume controllers

Use CMOS power transistor

Output type: 100V, 70V, 4~16ohm

Power supply: AC230V, DC24V(backup power)

A. Please read the entire attached documents carefully before using the device, and keep this manual for your

reference.

B. Please use the original packaging if the device is to be transported. Never remove the serial barcode from the

device as this would make the guarantee void.

C. Please don't use organic cleaner but dry soft cloth to clear the device.

D. The device should be equipped far away high temperature, moisture and powerful electromagnetic field.

E. The power supply must match the demand of the device with reliable ground wire.

F. All covering signal should be complied with the demand of the device.

G. Make sure to shut off before connecting.

H. Please consider that unauthorized modifications on the speaker system are forbidden due to safety reasons!

If this device will be operated in any way different to the one described in this manual, the product may suffer

damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-

circuit, burns, electric shock, hearing loss etc.

Summary of content (4 pages)

PAGE 1
A. Please read the entire attached documents carefully before using the device, and keep this manual for your reference. B. Please use the original packaging if the device is to be transported. Never remove the serial barcode from the device as this would make the guarantee void. C. Please don't use organic cleaner but dry soft cloth to clear the device. D. The device should be equipped far away high temperature, moisture and powerful electromagnetic field. E.
PAGE 2
1. Zone Volume Control There are six rotatable band switches, to control six Zones volume in five steps. When they are setting to 0 position, Zone outputs are turned off. 2. Mic1 Volume Control This control determines the proportion of the MIC1 channel signal in the mix, and provides a visual indication of channel vol. 3. Mic2/Line1 Volume Control This control determines the proportion of the MIC2/LINE1 channel signal in the mix, and provides a visual indication of channel vol. 4.
PAGE 3
(1) The SD card connector. (2) MODE: Push this key and release, change playing mode to USB, SD or Bluetooth. Push it with 1 second, turn on/off the player. (3) PLAY/PAUSE: In playing state, push this key and release to pause playing, push it again to recover playing. (4) FOLDER: Push this key and release, enter the folder menu. Then push the PREV or NEXT key to select a song, and push the PLAY/PAUSE key to play it. (5) REPEAT: Push this key to change cycle mode.
PAGE 4
21. Aux2 Input The AUX2 input (with RCA sockets) allows cassette recorder or CD player and sent to the Main output. 22. Aux3 Input The AUX2 input (with RCA sockets) allows cassette recorder or CD player and sent to the Main output. 23. A Group Of Send And Return Connect SEND(RCA socket) connector to an external device for sending output signal to that device. Connect RETURN(RCA socket) connector to an external device for accepting signal from that device.