User's Guide

Review Copy 11-6-10
ThingMagic Micro Family Guide
46
www.JADAKtech.com
Tag ID Buffer Fault Errors (Continued)
Message
Code
Cause
Solution
FAULT_TAG_ID_BUFFER
_FULL
601h
The tag id buffer is full.
Make sure the baud rate is set to a
higher frequency that the /reader/
gen2/BLF frequency.
Send a test case reproducing the
behavior to rfid-
[e-mail].
FAULT_TAG_ID_BUFFER
_REPEATED_TAG_ID
602h
The module has an internal
error. One of the protocols is
trying to add an existing TagID
to the buffer.
Send a test case reproducing the
behavior to rfid-
[e-mail].
FAULT_TAG_ID_BUFFER
_NUM_TAG_TOO_LARG
E
603h
The module received a
request to retrieve more tags
than is supported by the
current version of the
software.
Send a test case reproducing the
behavior to rfid-
[e-mail].
System Fault Errors
Message
Code
Cause
Solution
FAULT_SYSTEM_UNKNO
WN_ERROR
7F00h
The error is internal.
Send a test case reproducing the
behavior to rfid-
[e-mail].
FAULT_TM_ASSERT_FAI
LED
7F01h
An unexpected internal error
has occurred.
The error will cause the module to
switch back to Bootloader mode.
When this occurs make note of
the operations you were
executing, save FULL error
response and send a test case
reproducing the behavior to rfid-
[e-mail].