User's Manual

JunoT41/5
UserManual
51
open.Fornetworksthatrequirenetworkkeys,enterthenetworkkey
intothedialogboxandtapConnecttobeginusingthenetwork.
5. UnderNetworkAdapterstab,changescanbemadetowhatyour
networkcardconnectstoandtomodifyadaptersettings.

ToupdateWi‐Ficonnectionsettings:
1. OntheWirelessManagerscreen,tapMenu>Wi‐FiSettings.
2. Tapthenameofthenetworktoupdatethesettingsfor.
3. TheConfigureWirelessNetworkwizardappears.Updatesettingsand
tapNextasneededtoprogressthroughthewizard.
4. TapFinishtoclosethewizardandsavethesettings.

NOTE:IfyourdeviceisconnectedtoaPCthatisconnectedtotheInternet,
thedevicewillusethePC’sInternetconnectionandWi‐Fiwillnotappear
ontheWirelessManagerscreen.Youmayallowthesimultaneoususeof
thePCandtheWi‐Fimodulebydoingoneofthe following:
 In the ActiveSync software on your PC, select File >
Connection Settings and check the Allow wireless
connection on the device when connected to the desktop