User Manual

Tel: [phone]
Fax: [phone]
2 Hamelacha St., Poleg Industrial Zone, Natanya ,P.O.B 8249, ZIP 42504 Israel
LogiTag Systems LTD. www.logi-tag.com
Page
8/12
2.5 RFID transponders
The system supports UHF GEN2 and ISO 18000-6C RFID
transponders.
Transponders reading range up to 3m.
2.6 System operation:
To operate the system:
1. Press the power button; make sure either BAT or PWR led are on.
2. Make sure the BAT led is not blinking. If it blinks – battery is at low
capacity, connect to adaptor or USB cable for charging.
3. Establish BT connection either from PC or PALM computer.
For Palm/Pocket PC perform the following:
• Open Bluetooth explorer in explorer mode
• Click “Tool” => “Discover Devices”. Make sure reader is
turned on.
• Click “View” => “Wizard Mode”
• If New Connection Wizard doesn’t appear click on “File
=> New Connection”
• Select “Explore Services on Remote Device”
• Click Next
• Select the reader with its BT ID number in the devices
area and click “Next”
• Type PIN code “1234” and click “OK”
• Select “At Serial” and click “Next”
• Select connection favorite options and click “Next”
• Click “Connect”
• Select local COM port. Define port settings as mentioned.
Make note of the com you selected. You will have to
define it when you first run an application using the
Portable UHF reader API