Installation Guide

After the leak test is complete, cut a hole with a
diameter of 4 1/2” (114.3mm) - 5 1/2” (139.7mm) in
the subfloor to install the faucet.
5A
Loosen the plug (1) with the hex wrench (HEX:6mm)
from the rough body (2).
Lay concrete after installing the rough-in.
NOTE: The minimum thickness required for concrete
is 1.6" (40.6mm) and the maximum thickness allowed
for concrete is 3" (76.2mm).
After laying the floor, use a saw to remove the excess
plasterguard (1) from the exposed floor.
ASSEMBLY INSTRUCTIONS
4
5B
6
7
Joist
Stringer
Subfloor
Wood floor installation
φ 4 1/2” (114.3mm) Min
φ 5 1/2” (139.7mm) Max
Concrete floor installation
Finished Floor
Concrete
Plasterguard
1.6” (40.6mm) Min
3” (76.2mm) Max. to
top of Finished Floor
1
1
1
2