INSTALLATION MANUAL & WARRANTY INFORMATION Jacuzzi Luxury Bath 14525 Monte Vista Avenue Chino, CA 91710 1-800-288-4002 www.jacuzzi.
English* Installation Table of Contents Product Information.......................................................................................................................................................... 2 Important Safety Instructions......................................................................................................................................... 3-4 Inspection and Testing.....................................................................................................
English Installation Important Safety Instructions This is a professional grade product. A working knowledge of construction techniques, code-compliant plumbing/electrical installation are required for proper installation and user satisfaction. We recommend that a licensed contractor perform the installation of all Jacuzzi® products. Our warranty does not cover improper installation related problems. READ AND FOLLOW ALL INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
English Installation Important Safety Instructions (Continued) WARNING! RISK OF SEVERE INJURY! To avoid injury, use care when entering and exiting the hydromassage bathtub CAUTION! Do not use drugs or alcohol before or during the use of a hydromassage bathtub equipped with a heater. People using medications or having an adverse medical history should consult a physician before using a hydromassage bathtub equipped with a heater. Possible drowning may occur.
English Installation Framing and Support READ ALL INSTALLATION INSTRUCTIONS COMPLETELY. IMPROPER INSTALLATION WILL VOID THE WARRANTY. The floor structure beneath the bathtub must be able to support the total weight of the bathtub, water and bather. Consult a structural engineer. IMPORTANT! Make sure that walls and floors meet fire safety requirements of local building code and/or FHA/HUD Minimum Property Standards. Observe all governing codes and ordinances. 1.
English Installation Framing and Support (Continued) Subfloor Prepare the subfloor for the drain and ensure that the area is level. 1. The drain/overflow of the bathtub extends below the bottom of the bathtub. The Technical Specifications can be found at www.jacuzzi.com/baths/support/. 2. Make appropriate cuts to the subfloor to accommodate the drain. 3. The Jacuzzi Tru-Level® base is a standard feature on all bathtubs. If the subfloor is level and a continuous surface, no other preparation is necessary.
English Installation Fuzion® Specific Material The additional design features of the Fuzion® require that the following steps be completed prior to installing the bathtub in the constructed surround. The following steps must also be completed in the order specified: 1. Fuzion® Faucet Installation 2. Fuzion® Overflow/Drain Installation 3. Fuzion® Wood Frame Installation 4.
English Installation Fuzion® Specific Material (Continued) Fuzion® Frame Installation If you are installing a Fuzion® bathtub with accessory frame, please refer to the Fuzion® Frame Installation Guide (#GL44000) before proceeding any further. Complete the installation and assembly steps according to the Fuzion® Frame Installation Guide.
English Installation Chromatherapy Operation CHROMATHERAPY • Press once to turn lights ON at white level 2. • Press again to cycle colors. • Press again to stop at the current color. • Press again to restart the cycle. INCREASE TOGGLE • Press to increase light intensity. • Press to turn ON lights at last color used from OFF. NOTE: Default lighting color is white level 2. DECREASE TOGGLE • Press to decrease light intensity all the way down to off. NOTE: Default lighting color is white level 2.
English Installation Installation Procedures (Continued) 3. Sufficient clearance must be provided for access to service connections (pump/motor, controls, heater plumbing and electrical hook ups). 4. Bottom support materials: Casting plaster/plaster of paris (herein referred as foundation materials) are not necessary but its use is highly recommended for a firmer bottom support. In a bucket, mix foundation material.
English Installation Installation Procedures (Continued) Undermount Installation Fig. 12 1. Inspect all fittings, plumbing, and control lines after inserting to ensure the components are not damaged or disconnected. A B C 2. Align the bathtub and connect the drain. 3. Cut deck to fit using the undermount template provided as follows: • Position the template so that the desired undermount guidelines are aligned with Counter the rim edge as shown.
English Installation Installation Procedures (Continued) 6. Spot-fasten the two bottom corners and the two top corners of the vertical side nailing flange. 7. Nail/fasten at each stud through the topside flanges at each stud 16" (405 mm) on center, working from both ends toward back center. Complete the fastening through vertical side flange, approximately 8" (205 mm) on center. 8.
English Installation Skirt Panel Installation (Select Skirt Models Only) This skirt installation method is used for select bathtubs only. All other Comfort Collection bathtubs utilize magnets to secure skirt panels. Fig. 19 Receptor Socket To remove the skirt panel: Grasp an edge of the skirt panel and pull to separate. Post To reinstall the skirt panel (Figure 19): Align the six posts on the panel with the six receptor sockets on the tub and press into place.
English Installation General Maintenance To clean your bathtub, simply use a mild, nonabrasive liquid detergent solution. You can protect and restore the gloss to a dulled acrylic surface by applying Meguiar’s #10 Mirror Glaze, a product specifically designed for use on acrylic finishes. If Meguiar’s is not available, use a fine grade automotive rubbing compound followed by an application of clear automotive paste wax.
14525 Monte Vista Avenue Chino, California 91710 Jacuzzi Luxury Bath
WARRANTY REGISTRATION CARD To complete your registration, visit our website at www.jacuzzi.com or fill out and mail this card to the address printed on the other side within thirty (30) days from date of purchase in order for this warranty to become effective.
