Installation Guide
Installation and Operation www.jacuzzi.com Page 13
Collection Comfort
English
The heater turns ON automatically any time whirlpool operation is active. Heater operation is not displayed on the
control panel. There is a visible indicator light on the heater itself that signies the heater is operating. The heater will
help maintain the temperature of the water in the bathtub (Figure 16).
The heater is equipped with a preset vacuum switch
which will not allow the heater to turn ON if the pump
is not running and water is not owing through the
whirlpool system.
The heater includes an exclusive High-Limit switch. This safety circuit will not false trip from hot tap water. It will only
turn OFF the heater if the thermostat fails. To reset, press the button. If the high-limit trips frequently, please visit
www.jacuzzi.com, or call 1-800-288-4002.
PUSH TO RESET
OVER HEAT
PROTECTION
HEATER ON
High Limit Reset
Heater On
Fig. 16
In-Line Maintenance Heater (Whirlpool Models Only)
Vacuum Switch
High-Limit Switch
CAUTION: Do not use oil or oil-based bathtub additives. Never use abrasive or caustic household
cleaners on any Jacuzzi Luxury Bath product.
If you want to use any kind of bathtub additive, use only a small amount of low-foaming powder or crystal substance;
the whirlpool action intensies the foaming properties of soaps.
The use of certain bathtub oils, bubble baths, and bathtub additives may increase the level of accumulations
of bathtub residue in the whirlpool system and may cause false reading of the water level sensors. If excess
accumulations persist, you should discontinue use of these products.
To remove accumulations of bathtub residue from the whirlpool system, it is recommended that a bathtub be cleaned
regularly. For best results, however, we recommend that you clean your whirlpool bathtub after each use using
Systems Clean™, our exclusive two-part plumbing system cleaner made specically for whirlpool bathtubs. Systems
Clean™ is available through an authorized Jacuzzi Luxury Bath distributor, or by calling 1-800-288-4002 or may be
purchased online at www.jacuzzi.com.
To clean your bathtub, simply use a mild, non-abrasive liquid detergent solution. You can protect and restore the gloss
to a dulled acrylic surface by applying Meguiar’s #10 Mirror Glaze, a product specically designed for use on acrylic
nishes. If Meguiar’s is not available, use a ne grade automotive rubbing compound followed by an application of
clear automotive paste wax.
Minor scratches which do not penetrate the color nish can be removed by lightly sanding with 600-grit wet/dry
sandpaper. Restore the gloss using Meguiar’s Mirror Glaze or automotive paste wax. Major scratches and gouges
which penetrate the acrylic surface will require renishing. Call Jacuzzi Luxury Bath to nd a service agent in your
area.
Cleaning And Maintenance