Operating Guide

Important: Read complete instructions before beginning installation.
Each shower base is shipped with a drain and stainless steel strainer. An optional bright brass strainer is avail-
able for installation on the drain assembly.
Remove the shower base from the carton. Do not destroy the shipping carton until after satisfactory inspec-
tion of the product.
Immediately upon receipt, inspect the base before installing. Should inspection reveal any damage or defect in
the nish, do not install the base. Damage or defect to the nish claimed after the base is installed is excluded from
the warranty. Jacuzzi Whirlpool Bath’s responsibility for shipping damage ceases upon delivery of the products
in good order to the carrier. Refer any claims for damage to the carrier. For denitions of warranty coverage and
limitations, refer to the published warranty information packaged with the product. Jacuzzi Whirlpool Bath is not
responsible for any defect that could have been discovered, repaired, or avoided by following this inspection and
testing procedure.
Plan the installation in relation to the nished wall surfaces. Take into account the dimensions of both the shower
base and the shower door enclosure to be used with it.
10-1/2" x 5"
DRAIN CUTOUT
DRAIN
CUTOUT
FRAMING
WIDTH
25"
FRAMING
LENGTH
FRONT OF DOUBLE STUDS
SUB-FLOOR
FRAMING DETAILS
90º
90º
C
L
Page 2 1998 Jacuzzi Whirlpool Bath N660000D 01/07
DIMENSIONS
FRAMING FRAMING DRAIN CUTOUT
FOR UNIT SIZE LENGTH WIDTH CENTER LINE
48" x 34" 48-1/4" 35-1/4" 16-3/8"
48" x 48"" 48-1/4" 49-1/4" 23-3/8"
60" x 32" 60-1/4" 33-1/4" 15-3/8"
72" x 36" 72-1/4" 37-1/4" 17-3/8"