Installation Sheet
Page 12 www.jacuzzi.com
Installation
English
Cleanup After Installation
To avoid dulling and scratching the surface of the bathtub, never use abrasive cleaners. For most soiled surfaces, a mild
liquid detergent and warm water is sufcient. The following is also recommended:
• Remove spilled plaster with a wood or plastic edge. Spots left by plaster or grout can be removed if lightly rubbed with
detergent on a damp cloth or sponge. Do not use metal scrapers, wire brushes or other metal tools, as they will dam-
age the bathtub’s surface.
• Paint, tar, or other difcult stains can be removed with Fantastik® or soapy water.
• Minor scratches which do not penetrate the color nish can be removed by lightly sanding with 600-grit wet/dry sand-
paper. You can restore the glossy nish to the acrylic surface of the bathtub with a special compound, Meguiar’s #10
Mirror Glaze. If that is not available, use automotive rubbing compound followed by an application of automotive paste
wax.
• Major scratches and gouges which penetrate the acrylic surface will require renishing. Call Jacuzzi Luxury Bath to
nd a service agent in your area.
Cleaning
CAUTION! Do not use oil or oil-based bathtub additives. Never use abrasive, or caustic, household cleaners
on any Jacuzzi Luxury Bath product.
If you want to use any kind of bathtub additive, use only a small amount of low-foaming powder or crystal substance; the
whirlpool action intensies the foaming properties of soaps.
The use of certain bathtub oils, bubble baths, and bathtub additives may increase the level of accumulations of bathtub
residue in the whirlpool system and may cause false reading of the water level sensors. If excess accumulations persist,
you should discontinue use of these products.
To remove accumulations of bathtub residue from the whirlpool system, it is recommended that a bathtub be cleaned
regularly. For best results, however, we recommend that you clean your whirlpool bathtub after each use using Systems
Clean™, our exclusive two-part plumbing system cleaner made specically for whirlpool bathtubs. Systems Clean™ is
available through an authorized Jacuzzi Luxury Bath Distributor or by calling us direct at 1-800-288-4002 or may be pur-
chased online at www.jacuzzi.com.
Maintenance
To clean your bathtub, simply use a mild, nonabrasive liquid detergent solution. You can protect and restore the gloss to a
dulled acrylic surface by applying Meguiar’s #10 Mirror Glaze, a product specically designed for use on acrylic nishes. If
Meguiar’s is not available, use a ne grade automotive rubbing compound followed by an application of clear automotive
paste wax.
Minor scratches which do not penetrate the color nish can be removed by lightly sanding with 600-grit wet/dry sandpaper.
Restore the gloss using Meguiar’s Mirror Glaze or automotive paste wax. Major scratches and gouges which penetrate
the acrylic surface will require renishing. Call Jacuzzi Luxury Bath to nd a service agent in your area.