Installation Guide

C OF THRESHOLD

Determining Glass Enclosure Dimensions

*C represents the dimension from the stud wall to the

face of the finishing materials used in the shower con-

struction.

If Jacuzzi Whirlpool Bath surround walls are used,

subtract 1-3/8" from dimension A to arrive at glass

enclosure dimensions. If other materials are used,

subtract their thickness from dimension A.

FOR SQUARE AND RECTANGULAR SHOWER

BASES: if Jacuzzi Whirlpool Bath surround walls are

used, subtract 1-3/8" from stud wall of each end to arrive

at glass enclosure dimensions (see front page illustra-

tion and chart). If other materials are used, subtract their

thickness from stud wall of each end.

ROUGH-IN DIMENSION CHART (Neo-Angle Only)

3838N 16 3/4" 28" 1-3/8"

4242N 20-3/4" 27-3/8" 1-3/8"

4848N 26-3/4" 27-1/2" 1-3/8"

MODEL A B C*

Printed in U.S.A.

Printed on Recycled Paper

Jacuzzi Whirlpool Bath National Headquarters

P.O. Drawer J, Walnut Creek, CA 94596

Service Support: Call 800-288-4002

PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

USE INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT.

Jacuzzi Whirlpool Bath has obtained applicable code (standards) listings generally available on a national basis for products of

this type. It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of the product.

Jacuzzi Whirlpool Bath makes no representation or warranty regarding, and will not be responsible for any code compliance.

Authorized Service

If you need a referral for a service company near you, or need assistance with operation or maintenance related

questions, please call our Service Support Department at 1-800-288-4002. For service agent listing, visit our web site

at http://www.jacuzzi.com/. To find the service agent listings, click on “For The Trade”. Then click on Electrical/

Mechanical Service Agents. Depending on the problem, click on “Electrical/Mechanical Repairs” or “Finish, Surface

or Shell-Related Problems”.