Technical Specifications

L
W
H
J (L) J (W)
K(W)
K (L)
L (D)
A
C
B
I
M
F
TOP VIEW
SIDE VIEW
END VIEW
N (L)
N (W)
QA63000F
Key Dimensions
*Deck width reects only area indicated on detail.
NOTE: Drawings not to scale.
Letter Description
Soaking
5932 6732 7032
- Drain Location Center Drain
- Pump Location N/A
- Cutout Template N/A
- Total Weight 895 lbs (406 kg) 1008 lbs (457 kg) 1057 lbs (480 kg)
- Floor Loading 68 lb/ft² (332 kg/m²) 68 lb/ft² (332 kg/m²) 68 lb/ft² (332 kg/m²)
- Operating Gallons (Max) 66.5 gal (251 liters) 79 gal (299 liters) 84 gal (318 liters)
- Product Weight - Empty 93 lbs (42 kg) 102 lbs (46 kg) 110 lbs (50 kg)
- Soaking Depth 15.5" (394 mm) 14.5" (369 mm)
L Outer Length 59.0" (1501 mm) 67.0" (1704 mm) 70.0" (1781 mm)
W Outer Width 31.5" (801 mm) 32.0" (814 mm)
H Overall Height 23.25" (591 mm) 23.0" (584 mm)
A Overow Height 15.7" (400 mm) 14.75" (375 mm)
B Long Edge to Drain Center 15.74" (400 mm) 15.81" (402 mm)
C Short Edge to Drain Center 29.54" (752 mm) 33.48" (852 mm) 35.0" (890 mm)
D Drain Shoe Length N/A
E Flange Height N/A
F Deck Width* 1.50" (38 mm) 2.50" (64 mm)
G Service Access Dimensions No Service Access
I Floor Cutout for Drain 4.0" x 4.0" (102 mm x 102 mm)
J Interior Dimensions (JW x JL)
Bottom of Bath
20.94" x 39.69"
(532 mm x 1008 mm)
20.67" x 47.98"
(525 mm x 1219 mm)
18.22" x 49.86"
(463 mm x 1266 mm)
K Interior Dimensions (KW x KL)
Top of Bath
29.02" x 56.66"
(737 mm x 1439 mm)
28.92" x 64.47"
(735 mm x 1638 mm)
26.55" x 64.69"
(675 mm x 1643 mm)
L Interior Depth - Drain End (D) 18.90" (481 mm) 18.50" (470 mm)
M Backrest Angle 25° 29°
N Footprint (W x L)
26.92" x 49.52"
(684 mm x 1258 mm)
26.92" x 57.40"
(684 mm x 1458 mm)
24.80" x 58.27"
(630 mm x 1480 mm)
Celeste™ Freestanding Bathtub Specications
©2017 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com/baths/
Refer to installation instructions included with xture before beginning installation. Please conrm product availability and specications before commencing with any installation work
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
NOTE
The overall dimensions are
nominal with a tolerance of
+0 and -.25" (6mm).
CAUTION: The
integral overow cover
is not removable.
The warranty will be voided if
attempted.