Specifications

III
power
automatically
FIVE. LED Instructions state
LED
INDICATO
R
STAND-BY
DEVIATION
STATE
CHARGING
STATE
END OF THE
CHARGING
FOD
BLUE
LIGHT
BRIGHT
NOT
BRIGHT
NOT
BRIGHT
NOT
BRIGHT
BLINKING
GREEN
LIGHT
NOT
BRIGHT
BRIGHT
BRIGHT
BRIGHT
NOT BRIGHT
SIX. Module working description
1：Put the tablet PC near the center of the transmitter coil , the green LED on the
module will light up, the tablet PC should have voltage and current input, the green
LED light is stand for charging.
2：When the module is energized, the blue light and green light are lit for a second
and then the blue light goes off and starts charging, The green light keeps on and the
blue light goes off, put a foreign body, the blue light was flashing.
3：If the tablet PC is far away from the center of the module，the module doesn’t
enter the charging state。LED in blue light illuminated steady state. at this point, you
need to move the tablet PC back to the module launch center, the module will
automatically enter the charging state.