Operation Manual

20
Assembling the table stand and telephone cords
Slide the canals of the table
stand into the tracks of the
base.
The table stand is mounted
when you hear a click.
Fit the modular contact of
the coiled cord into the plug
of the telephone.
Fit the modular contact of
the coiled cord into the plug
of the handset.
Connect the line cord to the
base and to the telephone
wall outlet.
Disconnect the coiled cord
and the line cord from the
base.
Push the button inside the
square hole next to the
modular jack using a pen or
a finger, and pull the bracket
away from the base at the
same time.
Disassembling the table stand