Operation Manual

26
Getting started
Activate the pedometer (first time use only)
Press and hold any button until the screen is activated.
Carrying the pedometer
The pedometer is protected by a pouch and can be carried in
pockets and handbags or around the neck by using the adjustable
strap provided.
To effectively use the pedometer for calculating calorie burned
(based on step count and user body weight) and distance walked
(based on step count and length of user’s stride), you are advised
to set the time and your user data in the Setting Mode.
Refer to SETTING MODE in this manual.
IMPORTANT Remember to set the time and your user data after
every battery replacement.
Battery replacement
The pedometer uses a CR2032 3V battery, which has already been
installed.
If displays on the screen, the battery is low. Please replace
battery for the pedometer for accurate counting and reading.
1. Use a paperclip to remove battery compartment lid from the
compartment.
2. Remove the old battery and insert the new one, matching the
polarities.
3. Replace the lid by pushing it back into place with some pressure.
NOTE: When the battery compartment is opened or battery is
replaced, all data in the pedometer will be reset.