Operation Manual

19
2. Push the TIME
V
-button and hold it until the alarm clock shows the desired alarm
time. Begin by pushing the button and hold it for quick scrolling, then push
momentarily a number of times to achieve exact time.
Note: Any alarm setting will automatically activate the alarm (AL ON).
3. Push the ALARM button once to confirm the setting. The display will then
return to normal time. If the ALARM button is not pressed again, the display will
automatically return to the correct time after about 10 seconds.
4. If you want to see the alarm time push the ALARM button and the alarm time will
be shown in the display. The display will automatically return to correct time after
about 10 seconds.
Switching Alarm function on/off
Use the AL ON/OFF button. If the display shows AL ON the alarm function is activated.
If the display does not show the symbol the alarm function is switched off.
How to stop the alarm
The alarm can be deactivated in two ways:
1. If you push the LIGHT/SNOOZE button, the light will be turned on and the alarm
will be switched off for 8 minutes after which it will sound again (SNOOZE).
The SNOOZE function can be activated again and again, each time silencing the
alarm sound for 8 minutes.
2. If you push the AL/OFF button, the alarm will be switched off.
How to use the light
Push the LIGHT/SNOOZE button and the display’s backlight will be switched on for
about 5 seconds.
Please note that the display on the product is a LCD (Liquid Crystal Display) and for
optimum readability of the display, the product must be placed in a location with
good lighting.
Please note: The LCD Display will not function if placed in an environment with
temperatures below 0°C or above 50°C (122°F).
Specifications
Power source : 1 UM-4 or “AAA” size batteries
Battery life : App. 1 year
Dimensions : 140 x 41 x 22 mm
Weight : 75 g