Manualshelf

Operation Manual

ManualsBrandsJacob Jensen ManualsMiscellaneousAlarm Clock
11121314151617181920
18
Congratulations with your new JACOB
JENSEN
TM
Alarm Clock.
The alarm clock is designed in Denmark by Jacob Jensen, whose products have gained
international recognition for their original, simple and classic design. Jacob Jensen has
received around 100 prizes from around the world and has 19 products included in the
Design Study Collection and The Design Collection of The Museum of Modern Art in
New York.
The JACOB
JENSEN
TM
Alarm Clock is a 24 hour clock with alarm, snooze function and
built-in light. The Alarm Clock can either stand on its own or it can be mounted
directly on the wall using a JACOB
JENSEN
TM
Mounting plate. The alarm clock can also
be mounted on a JACOB
JENSEN
TM
Weather station stand, on its own or with one or
more products from the JACOB
JENSEN
TM
Weather station range.
Mounting and replacing battery
The alarm clock requires 1 “AAA” battery (included - already mounted in the battery
compartment). Follow these steps to install or replace the battery:
1. Open the battery-cover on the back of the alarm clock.
2. Mount the battery as indicated by the polarity symbols (+/-) marked inside the
battery compartment.
JACOB
JENSEN
TM
Alarm Clock (registered design)
UK
3. Replace the battery-cover.
Note:
1. When you install or replace the battery the time has to be adjusted again.
2. When the display starts to go dimm it is time to replace the battery.
Setting Time
1. Push the TIME SET button for more than 2 seconds with a pointed object e.g. a
ballpoint pen. The button is placed on the back of the alarm clock. The flashing
display now shows TIME SET 0:00.
2. Push the TIME
V
-button and hold it until the correct time setting is obtained.
Push and hold the button = quick scrolling. Push momentarily = 1 minute forward.
Begin by pushing the button and hold it for quick scrolling, then push momentarily
a number of times to achieve exact time.
3. Push the TIME SET button once again to confirm.
Setting Alarm time
1. Push the ALARM button and hold it for more than 2 seconds. The display will start
flashing and show ALARM SET.
US