Operation Manual

30
Important notice
To obtain the best battery performance, keep the handset being
charged for six hours after first time installation.
When the handset is removed from the base, the LED in the base will
stay on for approximately five seconds before it will fade out.
Remove the battery from this product if storing over 30 days.
A.4. Setting language
After the initial charging of six hours you can start using your telephone. If you
would like to choose another language than the pre-set English, do as follows:
Press and press three times to select Display press
press twice to select Select Lang. Press press to select your
desired language: English, Deutsch, Français, Italiano, Nederlands, Español,
Dansk, Svenska, Türkçe, Norwegian
and press .
A.5. Replacement of the battery
Depending on your usage, it is recommended to change the rechargeable
battery every year to achieve the best performance.
To replace the battery, follow the instructions below:
1. Prepare one rechargeable battery, 3.7V 650mAH Li-ion battery, part number
60020436.
2. Gently remove the handset back cover, remove the old battery.
3. Observe polarity marks inside the battery compartment, and insert the
rechargeable battery. It is not possible to connect the battery with wrong
polarity.
•
•
•
4. Replace the handset back gently; making sure the orientation of the battery
compartment cover is correct.
A.6. Operation
1. To lift off the handset, gently press on
the upper part of the handset with your
index finger and the handset falls into your hand.
How to make a telephone call
a) Pick up the handset and press
to turn on
the line connection.
b) Dial the telephone number.
c) Put down the handset when the conversation is over.
or
a) Press the telephone number.
b) Press
for dialing the number and making the call.
c) Put down the handset when the conversation is over.