Operation Manual

28
A. INSTALLATION AND START-UP
The cordless phone system can only work under constant power supply to the base
station. It is advisable that another corded phone (works without mains power
supply) is connected to your phone system for emergency call purpose in case of
power failure.
Caution
Use only the Ktec Model KSLFB0750035W1EU (for the European market
except UK) / KSLFB0750035W1UK (for the UK market)
power adaptor with
red RJ11 plug that came with the unit. Using other power adaptors may
damage the unit and invalidate your warranty.
Plug the adaptor to a socket outlet that is close to the equipment and easily
accessible.
1. Connect the combo cord to the RJ45 jack of the combo jack.
2. Plug the power supply unit into the main wall outlet and connect the other
end to the RED jack of the combo jack.
3. Connect one end of the telephone line cord to the BLACK jack of the combo
jack; connect the other end of the telephone line cord to the country telephone
plug adaptor (optional).
4. Connect the country telephone plug adaptor to the wall outlet for telephone.
•
•
A.1. Wall mounting
Please do as follows:
1. Pull the Combo cord downwards through the groove
in order to let it out at the bottom and connect it to the
Combo jack.
2. Mount the base station by the enclosed screws and plugs
for 6 mm drill.