Manualshelf

Operation Manual

ManualsBrandsJacob Jensen ManualsTelephones10 DECT
18192021222324252627
43
H.1. Setting Ringer Volume & Ringer Type
Different ringer volumes and ringer types can be programmed to each handset.
Handset Ringer Volume
Key Map:
Audio Setting Ringer Volume select the volume
1. To arrive at this menu, push in standby mode, and use / to
start browsing until “Audio Setting” is shown on the screen. Press
2. Press / to select “Ringer Volume” and press
3. Press / to select the volume you want. (you will hear a sample of
each as you scroll through), then press to confirm.
4. Press
to exit and return to standby. If you select Volume “Off”, will be
displayed.
Handset Ringer Type
Key Map:
Audio Setting Ringer Type select the option
select the ringer type
1. To arrive at this menu, push in standby mode, and use / to
start browsing until “Audio Setting” is shown on the screen. Press
2. Press / to select “Ringer Type” and press
3. Press / to select the “External”, “Internal”, “Paging”, “Alarm”, or
“Appointment” and press to confirm.
4. Press
/ to select the melody you want. (you will hear a sample of
each as you scroll through), then press to confirm your selection.
5. Press to exit and return to standby.
I. ADVANCED OPERATION
Special Attention!!
The following sections are only for users who are familiar with electronics
products. Failure in following steps correctly may stop your DECT phone from
normal operation.
I.1. To register a new handset
When you register a new handset to your base, you will be asked to enter your
base PIN code. To enable registration mode on the base unit, press and hold the
PAGE button for five seconds. Before registration, make sure the new handset is
fully charged and that you have the base and the handset in front of you. Also,
make sure that all handsets and the base are in standby.
On the handset you want to register:
Key Map:
Add. Settings Register select the base number
1. Press to access the main menu.
2. Press
/ to select “Add. Settings” and press
3. Press / to display “Register” and press to confirm.
4. Press
/ to select your base number and press to confirm.