Operation Manual

42
Call waiting tone
This model has a special call waiting tone in addition to the one you typically hear
from your local service provider. This tone will be heard after the standard tone
when you receive a call waiting notification. This tone is provided as an extra
feature and will have to be turned on in order to activate as the default setting
is set to “Off”. To turn this feature on, go to the menu, select “Audio Setting”,
“Tones”, and “Call Waiting” – then set the feature to “On”. When activated you
can toggle between the calls by pressing . Please note that this function is
dependent on your service provider.
G.1. To review Caller ID records
Caller ID records can be reviewed at only one handset at a time because the records
are only stored in the base unit.
To review Caller ID records in the handset, press and select the “Call Log
List”. Use / to scroll among records, or press to exit and return
to standby.
G.2. To make a call from Caller ID records
You may make a call from the Caller ID records. Press and select the “Call
Log List”. Use / to scroll and select the desired number/name. Push
on the handset to dial the desired caller’s number (or name).
G.3. To store a number from Caller ID records to Phone Book memory
You may store a number from the Caller ID record to a new Phone Book memory.
Please refer to F. PHONE BOOK section for details.
G.4. To delete Caller ID memory
You may delete either a single or all records in the Caller ID memory.
On the handset
1. Press
and select the “Call Log List”. Use / to scroll and select
the desired entry you intend to delete. If you want to delete all entries, skip this
step.
2. Press
to select “Erase Entry” or “Erase List”.
3. Press
to select “Yes” or “No”. Then press to confirm.
G.5. Message Waiting Indicator (MWI)
If Voice Message service is available from your service operator and you have
subscribed to this service, the symbol of Message Waiting will be shown on
the screen when a voice message is left in your message box registered with the
telephone operator. This is also supported by the LED lights blinking on the base.
Depending on your service operator’s service, Message Waiting Indicator should
turn off automatically when you have checked your left message in the operator’s
server.
H. PERSONALIZING YOUR PHONE
This DECT phone is built with features to offer you personalized settings, such as
ringer type, ringing volume, key click and key lock.
Referring to the description of the MENU button in previous section, all these
personalized settings can be programmed via Menu Programming mode.