Operation Manual

38
D.14. Prefix dialing
If you need to add a prefix to the number for a long distance call, or if you need to
add your saved area code to the number, do the following:
Key Map:
Setting Base Additional Prefix Dial
enter the number
1. Press to access the main menu.
2. Press
/ to select “Setting Base”. Press
3. Press
/ to select “Additional”. Press
4. Press / to select “Prefix Dial”.Press . The current setting is
displayed.
5. Enter the number using the number keypad or press to clear.
Press to confirm.
6. Press
to exit and return to standby mode.
D.15. Call barring
When switched on, Call Barring prevents calls from being made to a specific
number, area code or international code.
Key Map:
Setting Base Call Barring enter the number
select On/Off
1. Press to access the main menu.
2. Press
/ to select “Setting Base”. Press
3. Press / to select “Call Barring”. Press
4. Enter the number using the number keypad or to clear. Press to
confirm.
5. Press
/ to select “On” or “Off”. Press to confirm.
6. Press
to exit and return to standby mode.
E. NORMAL OPERATION
E.1. To make a new call
1. You can only make a call with your handset. You cannot make a call from your
base unit.
2. On the handset, enter the telephone number to be called and press
(if you press again, you can toggle to speaker phone).
The entered number will be dialed automatically. After a short delay, the call
timer will start timing the call, if “Time” is selected in “Talk Display” menu.
3. Press
to exit and return to standby mode.
E.2. To receive a call
1. You may receive calls through the handset only. When you receive a call, the
handset(s) will ring as long as the handset ring volume is not set to “Off”. The
telephone icon on the handset screen will flash.
2. If you have subscribed to caller ID service with your telephone operator, caller’s
number will show on the screen while the handset is ringing. If the caller’s
number is stored already in the Phone Book of your handset (refer to F. PHONE
BOOK
), the matched name will be displayed on the handset display screen when
the phone receives a call.