Operation Manual

34
Button In standby mode In conversation
mode
In programming /
viewing mode
While the phone
rings, press and hold
this button for three
seconds to turn off
the ringer tempo-
rarily.
Press to get a new
line or press to
answer a waiting call
if your telephone
company offers
this service. Press
to transfer a call to
another extension
on a PABX. This key
(flash) is a brief inter-
ruption of the line.
In programming
mode, this button
functions as Cancel
or Delete. Press it
to delete incorrect
digits or letters. Press
this to go back to
previous menu.
Press to make and
receive calls.
Press the key to
enable/disable the
hands-free speaker.
Press the key to initi-
ate a call in the
redial list, phone
book and call log list.
On Base unit
Press and hold for 5
sec to enable regis-
tration mode.
Push this button to
make a page ring at
the handset.
D. PREPARATION BEFORE USE
Attention
Your DECT phone is protected by PINs (personal identification numbers). Never
change the PINs of your base unit unless you are familiar with electronics products
and you have a real need to protect your phone by special PINs. A forgotten PIN
could stop operation of your DECT phone and may result in expensive technical
support services. For details please refer to section I. ADVANCED OPERATION.
D.1. The OK/MENU button
This DECT phone is built with a user-friendly MENU function. All essential functions
of this phone can be programmed via the MENU button by a question &
answer (Q&A) approach.
By pushing on the handset, it leads you to browse through the following
function menus in a circular manner. You may push to browse upward and
to browse downward.
Call Log List > Internal Call> Audio Setting >Display > Auto Talk > Time & Alarm >
Add. Settings > Setting Base > Baby Monitor >
Throughout the remaining part of this Instruction For Users, a quick Key Map will
lead you to different programming areas where you will be asked to make your
selections.