User Manual

JACLO.COM
|
PG 9
THERMOSTATIC WALL VALVE
PROCEDURE TO FLUSH THERMOSTATIC VALVE
1 › Shut off water supply to valve.
2 › Remove stop nut and check valve/stop (hot & cold). Rotate to make removal easier.
3 › Screw in flushing adapters (hot & cold).
4 › Turn on water. Flush for 30 seconds to remove any debris from lines.
5 › Remove flush adapters (hot & cold).
6 › Reinstall check/valve stop (hot & cold) and stop nut. Rotate to make installation easier.