Installation Sheet

ManualsBrandsJACLO ManualsShop All JacloJaclo CUBIX® II Robe Hook

j a c l o i n d u s t r i e s | 129 Dermody Street Cranford, NJ 07016

p 908.653.4433 | 800.852.3906 f 908.653.1717 | 800.852.4133

CREATED 8.23.2017

JACLO.COM

PG 2

Single Hole Accesories Installation

(5401-RH, 5401-SD, 5401-TH, 5401-TR, 5401-

LTP, 5401-STP)

1. Determine desired location of accessory.

2. Remove mounting bracket from accessory

using allen wrench. Place set screw in secure

location.

3. Draw level mark through both holes on

mounting plate.

4. Drill ¼” hole and insert plastic anchors in

wall.

5. Insert screw through mounting base and

HAND tighten, ensuring at surface is level

and on bottom.

6. Place accessory over mounting base and

secure with set screw.

Double Hole Accessories Installation

(5401-TB-18, 5401-TB-24, 5401-GS,

5401-GSW)

1. Determine desired location of accessory.

2. Using level and pencil, draw level line

length of towel bar/glass shelf.

3. Measure center to center of holes in

mounting bracket while mounting brackets

are in place. And mark location on wall.

4. Drill ¼” hole and insert plastic anchors in

wall.

5. Remove mounting brackets from accessory

using 3/32” allen wrench. Place set screws

in secure location.

6. Insert screws through mounting brackets

and HAND tighten, ensuring at surfaces

are level and on bottom.

7. Place accessory over mounting bases and

secure with set screws.

COMPONENT PARTS

QTY.

Wall

Set Screws

Hex Wrench

Plastic Wall Anchors

Mounting Bracket

Screws

Bracket Detail

5/8"

Must be

on bottom

for installation

CUBIX® II Accessory

"JACLO INDUSTRIES PROPRIETARY INFORMATION"

Dimensions are for reference only.

Jaclo reserves the right to change specifications without notice.