Installation Sheet

j a c l o i n d u s t r i e s | 129 Dermody Street Cranford, NJ 07016
p 908.653.4433 | 800.852.3906 f 908.653.1717 | 800.852.4133
REVISED 9.9.2016
JACLO.COM
|
PG 3
SINGLE POST INSTALLATION FOR:
Robe hook, Towel ring, Toilet Paper Holder
1. Place mounting post (1) on wall in desired location and mark location of mounting holes
(Fig. 1).
2. Select the hardware (2 & 3) or (4) that best suits your application and secure mounting
post (1) to wall (Fig. 2).
3. Place mounting post (1) on wall in desired location and mark location of mounting holes
(Fig. 1).
4. Slide accessory post (6-varies with accessory) onto mounting post (1) until it touches the
top of escutcheon (5) and secure with set screw (7).
DOUBLE POST INSTALLATION FOR:
Toilet Paper Holder, Towel Bar, Glass Shelf
1. Select the hardware (2 & 3) or (4) and attach both mounting posts (1) to the wall using
the top mounting hole only (Fig. 4). Select correct center line for accessory. Tighten
mounting screw lightly. Do not secure.
2. Loosely assemble accessory with accessory post (6) onto mounting post. Adjust
mounting post as shown and mark location for second mounting screw (Fig. 5).
3. Remove accessory and secure mounting post to wall using remaining hardware.
4. Thread escutcheon (5 -style varies) onto mounting post (1).
5. Slide accessory with accessory post (6) onto mounting post (1) until it touches the top of
escutcheon (5) and secure with set screw (7).