Installation Sheet

j a c l o i n d u s t r i e s | 129 Dermody Street Cranford, NJ 07016
p 908.653.4433 | 800.852.3906 f 908.653.1717 | 800.852.4133
REVISED 2.7.2019
Confidence from start to finish.
®
JACLO.COM
|
PG 1
INSTALLATION INSTRUCTIONS
Decorative Traps
Part #’s: 255, 256, 270, 271, 257, 258
1
4
5
2
3
1
Sink tailpiece
not supplied
Tailpiece adapter
not supplied
2
INSTALLER WARNING
Follow all applicable Local Plumbing Codes, Public Health and Safety Codes.
We recommend this product be installed only by a qualied professional contractor/plumber
IAPMO Certied File #5959
Preparation
Sink or basin is installed in nal position
Sink drain is installed in sink basin
Wall "stub" connection is complete with tail piece adapter/connection close to wall so escutcheon covers it
Trap Installation
1. Position body under sink, measure wall tail piece length, cut wall tail piece
2. Slide escutcheon on to wall tail piece
3. Push tail piece in to wall adapter
4. Slide nut over wall tail piece
5. Lubricate gasket with silicone grease or liquid soap. Slide gasket over wall tail piece
6. Slide lock nut over sink tail piece
7. Lubricate gasket with silicone grease or liquid soap. Slide gasket over sink tail piece
8. Insert trap body into wall tail piece and slide up on to sink tail piece. Position body so a slight decline in wall
tail piece is obtained (approximately 5 degrees) tighten sink tail piece lock nut.
9. Tighten wall tail piece lock nut
10. Tighten wall adapter lock nut
11. Slide escutcheon over wall adapter
ITEM DESCRIPTION MATERIAL QTY
1 Nut Brass 2
2 Gasket Rubber 2
3 Body Brass 1
4 Tailpiece Brass 1
5 Escutcheon Brass 1

Summary of content (2 pages)