Use and Care Manual

15mm (16pcs )

A 2 pcs B 2 pcs C 2 pcs

Glider . Assembly Instructions – Model BH-10

LARGE PARTS (NOT TO SCALE)

TOOLS INCLUDED (NOT TO SCALE)

Allen Wrench (1 Pc)

Wrench (1 Pc)

Lock Nut (18 pcs)

Plastic Cap (30 pcs)

HARDWARE PARTS LIST

(SHOWN TO SCALE)

*Standard hardware items may be replaced locally.

(1/4”-20) missing parts? Call 800-800-4950

D 2 pcs E 1 pc F 1 pc

37mm (6pcs)

50mm ( 7pcs)

Nut Cap (18 pcs)

G 1 pc H 1 pc I 2 pcs

32mm (1pc)

Plastic Washer (8 pcs)

Zinc washer (32 pcs)

IMPORTANT:

Unless noted , do not tighten any bolts until last step .

Step 1.

Locate the plastic wrapped brace inside the seat.

Unwrap it and place seat brace (I) to the back of the seat pan or

underneath both seat pans (B).

Back .

Arm .

Front Brace . Back Brace . Seat Brace .

Seat .

Left Base . Right Base .

Seat Connector.

Step 2.

Attach back to seat for each seat.

Attach seat (B) to back (A) with the 15mm screw (J).

Seat Brace .

PAGE 1
Glider . Assembly Instructions – Model BH-10 LARGE PARTS (NOT TO SCALE) A 2 pcs B 2 pcs Back . C 2 pcs Seat . D 2 pcs Seat Connector. E 1 pc Arm . F 1 pc Left Base . G 1 pc Right Base . H 1 pc I 2 pcs HARDWARE PARTS LIST (SHOWN TO SCALE) *Standard hardware items may be replaced locally. (1/4”-20) missing parts? Call 800-800-4950 Front Brace . J Back Brace . Seat Brace .
PAGE 2
Step 3. Assemble the Seats . Step 6. Attach the bench to the base. Connect the two seats and back together with the seat connectors (C). Do not tighten hardware.Leave hardware loose until last step. Seat Connector. C 32 mm K Seat Connector. N C S S N 50 mm P M FRONT N S S 50 mm N P P N N M Step 7. Tighten hardware using the two wrenches provided (T and U) . Add plastic screw caps (Q) to the outside of the hardware. Step 4 . Attach arms (D) to back seats. D S Arm .