Jabra® Stone2 User manual www.jabra.
THANK YOU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ABOUT YOUR JABRA STONE2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 WHAT YOUR HEADSET CAN DO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ABOUT YOUR JABRA STONE2 1 Answer/end button Tap to answer/end call english THANK YOU Thank you for purchasing the Jabra STONE2 Bluetooth® headset. We hope you enjoy it! This instruction manual will get you started and ready to make the most of your headset.
Your Jabra STONE2 lets you do all this: - Answer or ignore phone calls by using your voice - Ease of use with Jabra Voice Guidance - Last number redialling - Adjust volume up or down by touch control - Voice dialling - Three way calling - When connected, tap the answer/end button to hear battery status - MultiUseTM – be connected to two Bluetooth® devices at the same time - Listen to music in your headset through your Bluetooth® A2DP enabled phone - Battery status icon on your iPhone (Apple iPhone only) en
The device: - On/off function is automatic. When the headset is taken out of portable charging unit, it is on, and when it is inserted into the portable charger, it is off. When your phone rings, you can take the headset out of the portable charging unit and take the call on the headset - Charging is intelligent. The headset charges automatically when inserted into the portable charging unit ensuring that your headset is always fully charged ready for your next conversation - Usage is voice-assisted.
english CHARGE YOUR HEADSET Make sure that your Jabra STONE2 is fully charged before you start using it. Place the headset in the portable charging unit to charge both headset and portable charger fully for the first time before start using it. Use the AC power supply to charge from a power socket. While charging, the battery indicator on the portable charging unit shows solid red light and when the light indicator turns off, the headset and portable charger are fully charged.
1 Put the headset in pairing mode 1.a First time pairing - Take the headset out of the portable charging unit. The headset will automatically start up in pairing mode (showing flashing blue light on the Jabra StatusDisplayTM) and start searching for a device. 1.b Pairing with another phone or re-pairing - Take headset out of the portable charging unit. Turn the headset off by long press on Answer/End button.
HOW TO The Jabra STONE2 is easy to operate. The Answer/End button performs different functions depending on how long you press it: Instruction Duration of press Tap Press briefly Double tap Press briefly two times within 1/2 second Press Approx: 1-3 second Long press Approx: 4-5 seconds Extra long press Approx: 5-10 seconds english WEARING STYLE Wear Jabra STONE2 on your right ear and enjoy the comfort. Try out the different ear gels included in the pack to find your preferred fit.
Activate voice dialling* - Press Answer/End to activate voice dialling Three way calling - Press Answer/End to switch to call on hold.
“Welcome! You are now ready for pairing. Go to the Bluetooth menu on your phone. Turn on or enable Bluetooth. Search for devices and select your Jabra hands free device and chose pair or OK. If asked for a PIN code use 0000” What it means Announced when powered on the first time. Repeated after 20 seconds. Follow instructions on your phone ”Pairing failed” Announced if pairing process fails.
Announced when STONE2 is turned on ”Call ended” Announced when call is ended “Call from ”** Announced when incoming call and if the device supports Caller ID (PBAP) “Battery level is low/medium/ high” ”Battery level is high” is announced when battery has more than 50% left. If the battery level is between 20% - 50%. “Battery level is medium” is announced. If battery level is below 20% “Battery level is low“ is announced.
Light indicator on charging unit: By the charge plug on the charging unit a light indicator shows different states during charge of the product (AC charger or USB cable) english Jabra STONE2 StatusDisplayTM will turn off after 4 seconds of non-activity to save battery. Only when in pairing mode the StatusDisplayTM will remain turned on for longer time (3 min). The headset is still active.
english 2 Turn your headset off manually by pressing the Answer/End button for 4-5 seconds 3 Pair device number 2 with your headset using the same pairing instruction again 4 Connect to device 1 again Please note that it is important to connect to device 1 again after pairing device 2 to ensure connection to both devices. TROUBLESHOOTING & FAQ I hear crackling noises - Bluetooth® is a radio technology, which means it is sensitive to objects between the headset and the connected device.
I cannot hear music in the headset - Ensure that the headset is connected to your Bluetooth® enabled device - You may have been out-of-range (10 meters) to your Bluetooth® enabled device or the headset might have experienced an ESD (Electrostatic discharge) incidence. Press the Answer/End button to re-establish the Bluetooth® audio link - Increase the volume on your device - Make sure that the Jabra STONE2 is charged - Turn the headset off.
My Jabra product does not announce the caller names during incoming calls - Ensure that your phone supports the Bluetooth® phonebook access profile (PBAP) and that the name of the caller is in your phonebook. Please note that on some Android phones a warning message about the phonebook access appears in the top left corner. You must select this message and agree to the connection in order to get caller ID to function properly.
00800 722 52272 70 25 22 72 0800 1826756 00800 722 52272 900 984572 0800 900325 800 786532 00800 722 52272 0800 0223039 800 61272 00800 722 52272 0801 800 550 00800 722 52272 00800 722 52272 020792522 0800 0327026 +7 916 246 69 00 00800 722 52272 english 3.
1 Bluetooth® is a radio technology that connects devices, such as mobile phones and headsets, without wires or cords over a short distance (approx. 10 meters/33 feet). Bluetooth® is safe to use. It is secure too, so once a connection has been made no-one can listen in and there is no interference from other Bluetooth® devices either. Get more information at www.bluetooth.com. 2 Bluetooth® profiles are the different ways that Bluetooth® devices communicate with other devices.
© 2010 GN Netcom US, Inc. All rights reserved. Jabra® is a registered trademark of GN Netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice). © 2010 GN Netcom A/S. All rights reserved. Jabra® is a registered trademark of GN Netcom A/S.
