Jabra Link™ 850 User manual www.jabra.com 82-06061_RevC_Jabra Link 850_Manual_EN.
1.1 Jabra LINK 850........................................................................................................................................3 1.2 Optional accessories..................................................................................................................4 2. CONNECTING THE Jabra LINK 850.................................................5 english Contents 1. Product Overview............................................................................3 2.
1. Product Overview Jabra LINK 850 english 1.1 Telephone cable USB cable Desk phone headset/handset switch Speaker volume control Mute button Mute indicator QD cable Busy-light indicator port Handset port Telephone port USB port Guest headset port Mounting bracket Microphone volume control Clear dial tone switch Voice clarity switch Target phone switch Noise at work switch QD port Removable cover Jabra link™ 850 User manual 3 82-06061_RevC_Jabra Link 850_Manual_EN.
1.2 Optional accessories english The following Jabra LINK 850 accessories are available separately: Busy-light indicator AC power adapter Mute buttton for supervisor cable Jabra link™ 850 User manual 4 82-06061_RevC_Jabra Link 850_Manual_EN.
2.1 Connect to Power Connection to a PC is necessary to power the Jabra LINK 850. To connect to power, plug the USB cable into the USB port on the Jabra LINK 850, and connect the other end of the USB cable into any available USB port on your PC. The mute indicator will flash red three times to indicate the Jabra LINK 850 is now connected to power. 2.2 english 2. CONNECTING THE Jabra LINK 850 Connect to A desk phone Connecting to a desk phone will vary, depending on the type of desk phone used.
2.3 english Option 2: Desk phone without a headset port 1. On the desk phone, unplug the handset cable from the phone body and connect it to the handset port on the Jabra LINK 850. 2. Ensure the telephone cable is plugged into the telephone port on the Jabra LINK 850, and then connect the other end of the telephone cable into the handset port on the desk phone. The Jabra LINK 850 is now connected to the desk phone. 3. Set the target phone switch to desk phone (on the base of the Jabra LINK 850).
2.4 Connect TO A headset english Connect a headset to the QD cable, and plug the QD cable into the QD port on the Jabra LINK 850 If the headset is QD disconnected during a call, the call will be put on audio-hold. Reconnecting the QD resumes the conversation. Jabra link™ 850 User manual 7 82-06061_RevC_Jabra Link 850_Manual_EN.
3.1 Set a clear dial tone 1. Put on the headset. 2. Press the headset button on the desk phone, or take the desk phone handset off the hook. 3. Locate the clear dial tone switch on Jabra LINK 850 (refer to illustration below), and while listening in the headset for a clear dial tone, slide the switch from A to G. Determine the best switch position. The dial tone should be strong, clear and undistorted. 4.
4. USING THE Jabra LINK 850 adjust the headset speaker volume english 4.1 To adjust the headset speaker volume, use the speaker volume control on the Jabra LINK 850. 4.2 mute the headset microphone To mute the headset microphone, tap the mute button on the Jabra LINK 850. The mute indicator will light up red to indicate the microphone has been muted. To un-mute the headset microphone, tap the mute button again. The mute indicator will turn off. 4.
Connect an additional headset (GUEST HEADSET) 4.5 english 4.4 An additional headset can be connected to the guest port on the Jabra LINK 850 to allow another person to join the conversation. When connected, the additional headset has the same functions as the primary headset. Connect a busy-light indicator A busy-light indicator can be connected to the busy-light port on the Jabra LINK 850, and will to indicate to colleagues when you are on a call. 4.
5. advanced settings removing the removable cover english 5.1 Use a screwdriver to remove the Removable cover. 5.2 Noise at work switch The Noise at work switch on the base of the Jabra LINK 850 offers two settings for protection against potential risks, such as acoustic shock and noise exposure. Setting Description Peakstop™ and intellitone™. Compliant with the Noise at Work Directive 2003/10/EC of the European Parliament and Council of 6 February 2003 Peakstop™.
Voice clarity switch Setting Description Treble voice english 5.3 The Voice clarity switch on the base of the Jabra LINK 850 has two settings for adjusting the sound quality of your voice. Setting the switch to Treble voice may increase the clarity of your voice for the listener. Mid-range voice (default setting) Jabra link™ 850 User manual 12 82-06061_RevC_Jabra Link 850_Manual_EN.
english 6. FAQs and Troubleshooting Q Why do I not hear a dial tone when the headset is connected? A Check the following: • Ensure the telephone cable is connected to the telephone port on the Jabra LINK 850, and that the headset is connected to the QD cable port. • Ensure the USB cable is connected correctly to the PC for power. • Ensure the Target phone switch on the base of the Jabra LINK 850 is set to the correct telephone type (desk phone, or softphone).
english Made in China Type: ENA001 Jabra link™ 850 User manual www.jabra.com 82-06061_RevC_Jabra Link 850_Manual_EN.indd 14 81-03110 RevC © 2012 GN Netcom A/S. All rights reserved. Jabra® is a registered trademark of GN Netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice).
