Jabra LINK™ 280 User manual www.jabra.
© 2010 GN Netcom A/S. All Rights Reserved. Thank you This user guide is published by GN Netcom A/S. Thank you for purchasing the Jabra LINK™ 280 controller. We hope you enjoy it! This instruction manual will get you started and ready to make the most of your controller. The information in this user guide is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by GN Netcom A/S.
How to adjust volume on the controller Use the wheel at the center of the controller to adjust the volume. Turn clockwise to turn up and counterclockwise to turn down. You will hear a soft click in the headset each time you adjust the volume. When you reach maximum volume, the headset will beep twice as a warning. We recommend that you do not use the headset at full volume. How to connect controller to headset Plug the QD to the QD of any Jabra GN corded headset.
How to activate optional features How to use the Soft Buttons. The controller includes two soft buttons, labeled × and o, respectively. You are able to program the controller to use these two buttons for any of several functions. For example, you can configure one of the soft buttons to control the Bluetooth connection to a mobile phone. Jabra PC Suite Programs After installing the software, you will have an All Programs > Jabra > Jabra PC Suite folder in your Windows Start menu.
The Settings Tab The options on the Settings tab enable you to control the Audio protection (Intellitone). Use the settings in the Audio protection (Intellitone) area of the Settings tab to set the hearing-protection level of your headset. Hearing risk is evaluated as a function of both volume and duration. Therefore, the maximum sound level should be lowered as the number of hours you spend using the headset increases. The controller offer a choice of four protection levels.
Need more help? Once you have selected the mobile as one of the functions for your softbuttons, a Mobile tab will appear in the Jabra Control Center. You will be able to clear your paring list, thereby deleting the mobile phones paired to the controller. Once you have clicked Clear pairing list — the controller will automatically enter a pairing mode.
Certification and safety approvals Glossary CE This product is CE marked according to the provisions of the R & TTE Directive (99/5/EC). Hereby, GN, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information please consult http://www.jabra.
Made in China 14 www.jabra.com 32-00687 F © 2010 GN Netcom A/S. All rights reserved. Jabra® is a registered trademark of GN Netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice).
