USER MANUAL
Thank you . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 About your Jabra BT2050 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What your headset Does . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 english english GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . .
Thank you for purchasing the Jabra BT2050 Bluetooth® headset. We hope you enjoy it! This instruction manual will get you started and ready to make the most of your headset.
Your Jabra BT2050 lets you do all this: • Answer calls • End calls • Reject calls* • Voice dialing* • Last number redialing* • Call waiting* • Put call on hold* english What your headset Does Specifications • Talk time up to 4 hours/standby time up to 180 hours • Rechargeable battery with charging option from AC power supply, PC via USB cable or car charger (not included) • White colored light for status and battery indicator • Quiet mode – turns light off after 1 minute • Size: L 41,5mm x 18,9mm x H25,9
You should follow three steps before using your headset 1. Charge your headset 2. Activate Bluetooth on your mobile phone (refer to the manual for your Mobile phone) 3. Pair your headset to your mobile phone The Jabra BT2050 is easy to operate. The answer/end button on the headset performs different functions depending on how long you press it. Instruction Duration of press Tap Press briefly (Approx.
english Make sure that your headset is fully charged for two hours before you start using it. Use the AC power supply to charge from a power socket. When the light indicator (LED) has a solid LED light, your headset is charging. When the solid LED light turns off, it is fully charged. Use only the charger provided in the box - do not user chargers from any other devices as this may damage your headset.
JABRA BTx2050 JABRA BTx2050 english 3. Your phone will find the Jabra BT2050 • Your phone will find the headset under name “Jabra BT2050”. Your phone then asks if you want to pair with the headset. Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with the passkey or PIN = 0000 (4 zeros). Your phone will confirm when pairing is complete. JABRA BT2050 In case of unsuccessful pairing, put the Jabra BT2050 into pairing mode manually. Make sure the headset is off.
Reject a call * • Press the answer/end button when the phone rings to reject an incoming call. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or you will hear a busy signal. english Make a call • When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your headset. If your phone does not allow this feature, tap on the Jabra BT2050’s answer/end button to transfer the call to the headset.
What you see Call/connection status Solid light In pairing mode Slow single flash Connected to phone Slow triple flash Not connected to phone Quick double flash Incoming or outgoing call in headset 4 flashes (repeated every 5 sec) Low Battery english What the lights mean Troubleshooting & FAQ I hear crackling noises • Bluetooth is a radio technology, which means it is sensitive to objects between the headset and the connected device.
The device is not connected to my headset in time to answer an incoming call • If the headset is off and is turned on when a call is incoming, the device and headset might not connect in time for the call to be answered. In order to avoid such inconveniences please keep the headset on, in range and connected. english I cannot use Reject call, call on hold, Redial or voice dialling • These features are dependent on the ability of your phone to support a hands-free profile.
EXCESSIVE VOLUME LEVELS CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE. Headsets are capable of delivering sounds at loud volumes and high pitched tones which under certain circumstances can result in permanent hearing loss damage. Avoid prolonged use of the headset at excessive sound pressure levels. Please read the safety guidelines below prior to using this headset. english WARNING! You can reduce the risk of hearing damage by following these safety guidelines 1.
english • Never try to dismantle the product yourself. None of the components can be replaced or repaired by users. Only authorized dealers or service centers may open the product. If any parts of your product require replacement for any reason, including normal wear and tear or breakage, contact your dealer. • Avoid exposing your product to rain, moisture or other liquids to protect against damage to the product or injury to you.
Battery warning! • ”Caution” – The battery used in this device may present a risk of fire or chemical burn if mistreated. • Do not attempt to open the product or replace the battery. It is built-in and not changeable. • Use of other batteries may present a risk of fire or explosion and the warranty will be terminated. • Recharge your battery only with the provided approved chargers designated for this device. • Dispose of batteries according to local regulations. Please recycle when possible.
Limited One (1) -year Warranty GN Netcom A/S (“GN”) warrants this Product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of one (1) year from the date of purchase (“Warranty Period”). During the Warranty Period, GN will repair or replace (at GN’s discretion) this Product or any defective parts (“Warranty Service”).
Jabra bt2050 english Limitation of Warranty This Warranty is only valid for the original purchaser and will automatically terminate prior to expiration, if this Product is sold or otherwise transferred to another party. The Warranty provided by GN in this statement applies only to Products purchased for use, and not for resale. It does not apply to open box purchases, which are sold “as is” and without any warranty.
Certification english NOTE! This warranty gives you specific legal rights. You may have other rights which vary from location to location. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or implied warranties, so the above exclusions may not apply to you. This warranty does not affect your legal (statutory) rights under your applicable national or local laws. CE This product is CE marked according to the provisions of the R & TTE Directive (99/5/EC).
english 3. Pairing creates a unique and encrypted link between two Bluetooth devices and lets them communicate with each other. Bluetooth devices will not work if the devices have not been paired. 4. Passkey or PIN is a code that you enter on your Bluetooth enabled device (e.g. a mobile phone) to pair it with your Jabra BT2050. This makes your device and the Jabra BT2050 recognize each other and automatically work together. 5. Standby mode is when the Jabra BT2050 is passively waiting for a call.
© 2008 GN Netcom A/S. All rights reserved. Jabra® is a registered trademark of GN Netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice). www.jabra.
