Přenosný video monitor Portable Video Monitor
CZ OBSAH cz Vlastnosti video monitoru................................................................................ 3 Instalace SYSTÉMU..............................................................................................6 Nastavení VIDEO monitoru.................................................................................. 11 Řešení vzniklých závad..................................................................................... 13 EN Features of video monitor.........................
EN EN PORTABLE DIGITAL WIRELESS VIDEOMONITOR SYSTEM Thank you very much for the purchase of CMD 6129S Tiny product. We wish you pleasant pictures whenever the Tiny is on. FEATURES OF THE TINY VIDEO MONITOR Digital wireless technology provides excellent image quality and clarity An interference-free, secure and private signal Up to 450 ft (150 m) wireless transmission range (maximum open-space transmission range).
EN EN b) Bottom of the Receiver d) Receiver Cradle Inputs 10. Pair Button – This button is not used for Tiny monitor. 16. Audio and Video Output – Connect the included audio / video cable to view video from the receiver on a TV, monitor or to record it (when docked). c) Side of the Receiver 11. Night Light Button – Press to turn the night light ON or OFF remotely on the active camera. 12. Alarm +/- Button – To set the volume level of the transmitted sound and of the receiver beeping. 13.
EN Camera a) Front & Back of the Camera 1. Camera Antenna – Should not be close to the metallic parts. EN b) Side of the Camera 7. Volume Setting – To adjust the sound alarm sensitivity. The receiver will beep to alert the user when the sound is above the preset sound level. Adjust the side wheel to increase or decrease the level. 8. Camera ON/OFF Switch – To switch the camera ON or OFF. 2. Night Light Switch – The button itself is used as a night light (press to switch the night light ON or OFF).
EN EN Installing the Camera Viewing Mode 1. Signal Indicator –shows the strength of the signal being received from the camera. The number of bars in the signal indicator shows the strength of the signal. 1. Carefully unpack the camera and remove the foil on IR LED cover. 2.
EN Adjusting the Receiver Volume The receiver volume can be adjusted by using the UP/DOWN arrows u v while watching the video. Press the DOWN arrow v to decrease the volume and the UP arrow u to increase the volume. When the volume is set to one bar (lowest setting), the volume is muted. The volume strength indicator is shown on display while the volume is being adjusted and will disappear 10 seconds after final setting.
EN EN Troubleshooting TECHNICAL SPECIFICATION – Camera If any difficulties with the video monitor occur, please see the possible solutions below: Symptoms No picture from a camera The picture is dropping out Transmit Frequency Range 2.400 GHz~2.482 GHz Solution Can be operated according to ERC REC 70-03 1. Check the AC adaptor of the camera – whether it is connected to the camera and plugged into the mains. 2. Make sure that the camera and receiver are both ON. 3.
OUR RECOMMENDATION Nanny watches over your treasure Včasné varování Early warning Jednoduché ovládání Certifikované zdravotnické zařízení Easy operation Medical device certification
