Operation Manual

- 9 - MLO51201
RFID tag reader installation
 Install the RFID tag reader at the door (the magnet should be in the bottom left corner of
the bottom frame). If the reader is to be installed in a concealed box, insert the magnet in
the top frame of the reader.
 Connect the batteries and close the reader (the LED indicator should be at the top).
 Switch on the GSM control unit and test its functioning.
Switching the GSM control unit on for the first time
1. Find a concealed place near a socket.
2. Open the battery cover, remove the insulation strip and close the cover (A).