Operation Manual

The AN-81 externel antenna 2/2 MKE51200
The AN-81 external antenna
This antenna is designed for Jablotron wireless products, which use a
frequency of 868 MHz and are equipped with a connector only for AN-8x
antennas.
If you want to use the AN-81 antenna see the wireless device’s manual for
detailed instructions.
The active part of the antenna should be installed vertically and it should not
be obstructed by any metal objects. If the antenna is not placed on a metal plate
bigger than the antenna itself, then it is necessary to place a metal plate under
the antenna nut (part of packaging). This metal profile can be fixed onto other
metal objects or building constructions.
If the antenna is used in an alarm system, it should be located in the area
which is protected by the alarm system.
Note: Do not extend its RF cable.
Technical specification:
Communication band 868 MHz
Impedance 50
Ω
Cable length 1.2m
The AN-81 externel antenna 2/2 MKE51200
The AN-81 external antenna
This antenna is designed for Jablotron wireless products, which use a
frequency of 868 MHz and are equipped with a connector only for AN-8x
antennas.
If you want to use the AN-81 antenna see the wireless device’s manual for
detailed instructions.
The active part of the antenna should be installed vertically and it should not
be obstructed by any metal objects. If the antenna is not placed on a metal plate
bigger than the antenna itself, then it is necessary to place a metal plate under
the antenna nut (part of packaging). This metal profile can be fixed onto other
metal objects or building constructions.
If the antenna is used in an alarm system, it should be located in the area
which is protected by the alarm system.
Note: Do not extend its RF cable.
Technical specification:
Communication band 868 MHz
Impedance 50
Ω
Cable length 1.2m