Operation Manual

The AN-80 external antenna 2 / 2 MKE51400
The AN-80 external antenna
This antenna is designed for Jablotron wireless products which
use a frequency of 868 MHz and are equipped with a connector only
for use with AN-8x antennas.
If you want to use the AN-80 antenna see the wireless device’s
manual for detailed instructions.
The active part of the antenna should be installed vertically and it
should not be obstructed by any metal objects.
The antenna can only be placed on a non-conducting material.
If the antenna is used in an alarm system, it should be located in
the area which is protected by the alarm system.
Note: Do not extend its RF cable.
Technical specifications:
Communication band 868 MHz
Impedance 50
Ω
Cable length 2m
The AN-80 external antenna 2 / 2 MKE51400
The AN-80 external antenna
This antenna is designed for Jablotron wireless products which
use a frequency of 868 MHz and are equipped with a connector only
for use with AN-8x antennas.
If you want to use the AN-80 antenna see the wireless device’s
manual for detailed instructions.
The active part of the antenna should be installed vertically and it
should not be obstructed by any metal objects.
The antenna can only be placed on a non-conducting material.
If the antenna is used in an alarm system, it should be located in
the area which is protected by the alarm system.
Note: Do not extend its RF cable.
Technical specifications:
Communication band 868 MHz
Impedance 50
Ω
Cable length 2m