User`s guide

XE_BTP-06.ENG.MAN.manual.04.C
- 8 -
Manufacturer Supported mobile phones
Main func ons
Voice call (HF) Contacts sync SMS send SMS sync Call log sync
Palm Treo 850 x x x
Sony Ericsson
C510, C702, C902, C903, C905, G502, K660i, K850i, V640, V640i, W508,
W595, W705, W890i, W910i, W995, T707, T715, K530i, K550i, K610,
K770i, K800i, K810i, S500i, W580i, W610i, W660i, W850i, W880i, Z610i
x x x x x
Samsung
GT-S5230 x x x x
Omnia x x x
SGH-U900 Soul x x x
B2100 Xplorer, SGH-E250i, SGH-J700V x x
GSM phones not supported by BTP-06:
LG KF310
Motorola RAZR 2 V8, A1890
Nokia 5800 XpressMusic, 6310i, 6600
Sony Ericsson W302
Vodafone VF533
The most recent list of supported mobile phones can be found at www.jablocom.com/products/btp.

The BTP-06 supports the basic call func ons of your mobile phone:
 Answer call
 End call
 Reject call
 Dial a number
 Redial last number
Using the BTP-06 for making and receiving calls is very simple – it can be operated in a similar way as any
landline phone – just pick-up the receiver (or use the speakerphone), dial the number or select it from the
contacts.

There are two types of contacts in the BTP-06:
 
These contacts are copied from your paired mobile phone. If the mobile
phone supports contact synchroniza on, you’ll see all of its contacts in the
BTP-06 contact list. They’re marked with a mobile phone icon. You cannot
,  or  them using the BTP-06: this is only possible using the
mobile phone.
 
If your mobile phone doesn’t support contact synchroniza on, you won’t be
able to see any of its contacts in the BTP-06. But there’s an internal contact
list available for you in BTP-06. You can
,  or  its contacts using
the BTP-06 or JabloTool (synchroniza on with Outlook), but you will not see
them in your mobile phone. Internal contacts are marked with a desktop
phone icon. This internal list is not enabled for mobile phones suppor ng
contact synchroniza on (It can be enabled in
Menu > Settings > Service > Internal contact ).
If there’s no mobile phone connected to the BTP-06, no contacts are available.