Installation Guide

USB Type-C
9.5 in. /24 cm
USB 3.1/ 3.0/
2.0 Devices
RJ-45
USB Type-C
DC in 5V - 20V
HDMI
4K HDMI
USB-C®
Dual HDMI™ Mini Dock
Ethernet / USB™ 3.1 HUB / PD 2.0
※ Please download the latest drivers at
www.j5create.com SUPPORT page.
※ Do NOT plug the j5create USB™
adapter into the computer until the
driver is completely installed.
JCD381
Installation Windows®
Étape 1.
Si vous avez accès à l'Internet, il est fortement recommandé que vous téléchargez le
dernier logiciel www.j5create.com sous Support & Services Faites défiler vers le bas pour le
logiciel du produit que vous installez et téléchargez le dernier logiciel pour votre système
d'exploitation. (Remarque: Si possible exécuter en tant qu'administrateur)
Étape 2.
Suivez les instructions pour installer le logiciel. (Vous devrez peut-être cliquer sur "Poste de
Travail" téléchargements et choisissez j5UsbDisplayAdapter pour commencer l'installation)
Étape 3.
Une fois le téléchargement du logiciel terminé, cliquez sur Terminer pour Redémarrer. Après
le redémarrage de votre ordinateur, connectez le dispositif d'affichage externe (moniteur /
projecteur) au connecteur de l’adaptateur graphique USB™. Connectez l'adaptateur
graphique USB™ dans le port disponible d'un PC ou ordinateur portable.
Étape 4. Réglage de l’affichage
Windows: Faites un clic droit sur l'icon ,trouvé au bas de la barre d'outils, à droite, ce qui
ouvra la rubrique des reglements d'affichages. Si le logiciel s'est installé automatiquement,
vous verez l'icon différent
.
Étape 1. Étape 3.Étape 2.
● Le logiciel s’instalera automatiquement sur Windows® 10 / 8.1 / 7
(Plug & Play nécessite un accès Internet)
USB Type-C
Dual HDMI Mini Dock
JCD381
Étape 1.
Téléchargement du logiciel est disponible à www.j5create.com dans la rubrique
"Support & Services". (Remarque: Si vous avez des difficultés à télécharger ce logiciel
vos paramètres de sécurité peuvent avoir besoin d'être ajustées pour permettre "le
téléchargement de n'importe où")
Étape 2.
Choisissez le système d'opération correspondant à votre système et suivez les
instructions pour installer le logiciel. (Vous devrez peut-être cliquer sur Finder
téléchargements et choisissez j5UsbDisplayAdapter pour commencer l'installation)
Pour les utilisateurs de la version 10.12: Cliquez sur "OK" lorsque vous voyez la
fenêtre pop-up. Allez à Sécurité et confidentialité> Généralités, puis cliquez sur
"Ouvrir de toute façon" pour installer le pilote.
Étape 3.
Une fois le téléchargement du logiciel terminé, cliquez sur Terminer pour Redémarrer.
Après le redémarrage de votre ordinateur, connectez le dispositif d'affichage externe
(moniteur / projecteur) au connecteur de l’adaptateur graphique USB™. Connectez
l'adaptateur graphique USB dans le port disponible d'un PC ou ordinateur portable.
Étape 4. Réglage de l’affichage
Allez sur ( ), puis Préférences Système. Choisissez l'onglet Affichage ou Arrange-
ment pour ajuster.
Installation macOS®
Étape 1. Étape 3.Étape 2.
( For v10.12 )
● Ne branchez pas l'adaptateur d'affichage j5create USB™ dans l’ordinateur avant que le
logiciel soit complètement installé.
USB Type-C
Dual HDMI Mini Dock
JCD381
Environnement requis
● Port USB-C® disponible (USB-C® 3.1 Gen 1 recommandé)
● Compatible USB™ PD 2.0 pour chargement amont
● Windows® 10 / 8.1 / 8 / 7
● macOS® X v10.8 ou version ultérieure
● CPU : Intel® Core™ i3 double cœur 2,8 GHz
RAM : 2 Go de mémoire ou plus
● Lecture vidéo plein écran
4K Ultra HD (une) ou 2K (2048 x 1152 à 60 Hz) (deux)
CPU : Intel® Core™ i7 quadricœur / RAM : 8 Go de mémoire ou plus
Carte graphique : Intel® HD Graphics 4000/ ATI™ HD 7xxx/
NVIDIA® SXXM ou version supérieure
A Noter
● Si vous utilisez un appareil USB™ à puissance élevée, veuillez raccorder
l'adaptateur électrique USB-C® au port Power Delivery pour garantir des
performances maximales
● Pour garantir la copie complète des fichiers, ne retirez pas l'adaptateur électrique
USB-C® en copiant des fichiers.
● Avant de mettre à niveau votre système d'exploitation, mettez d'abord à jour le pilote
de votre produit j5create pour éviter les problèmes de compatibilité
Instalación del controlador de Windows®
Paso 1. Paso 3. Paso 2.
Paso 1.
Si tiene acceso a Internet es muy recomendable que descargue la última controlador
desde www.j5create.com bajo Soporte y Servicios - desplácese hasta la conductor de
producto que está instalando y descargar el controlador más reciente para su
funcionamiento sistema. ( Nota: Si es posible carrera como administrador )
Paso 2.
Siga las instrucciones para instalar el controlador. (Es posible que tenga que hacer
clic en Mi PC> Descargas y seleccione j5UsbDisplayAdapter para comenzar la
instalación)
Paso 3.
Una vez que el controlador se ha instalado seleccione "Sí" y haga clic en "Finalizar"
para reiniciar el ordenador y completar la instalación del controlador. Una vez
reiniciado el ordenador, conecte el j5create USB™ Display Adapter de la pantalla y
luego a su ordenador. Ahora ya está listo para su uso j5create USB™ Display Adapter!
Paso 4. Configuración de pantalla
Windows : Haga clic derecho sobre el icono en la parte derecha inferior de la
barra de herramientas para configuración de pantalla abierta. Si la unidad se instala
automáticamente , podrás ver los diferentes icono .
● Controlador automáticamente instalar en Windows® 10 / 8.1 / 7
( Plug & Play requiere acceso a Internet )
USB Type-C
Dual HDMI Mini Dock
JCD381
Paso 1.
Si tiene acceso a Internet es muy recomendable que descargue la última controlador
desde www.j5create.com bajo Soporte y Servicios - desplácese hasta la conductor de
producto que está instalando y descargar el controlador más reciente para su
funcionamiento sistema. ( Nota: Si es posible carrera como administrador )
Paso 2.
Elija el sistema operativo correcto para su sistema y siga el instrucciones para instalar
el controlador. (Es posible que tenga que hacer clic en Finder > Descargas y
seleccione j5UsbDisplayAdapter para comenzar la instalación).
Para usuarios de v10.12: Haga clic en "Aceptar" cuando vea la ventana emergente.
Vaya a Seguridad y privacidad> General y luego haga clic en "Abrir de todos modos"
para instalar el controlador.
Paso 3.
Una vez que la instalación inicial se haya completado, haga clic en Reiniciar para
finalizar la instalación del software. Una vez reiniciado el ordenador, conecte el
j5create USB Display Adapter a la pantalla primero y luego a la computadora. Ahora
ya está listo para su uso j5create USB™ Display Adapter!
Paso 4. Configuración de pantalla
Vaya a ( ) y luego Preferencias de Sistema Elija la etiqueta Mostrar o Ajustar para
ajustar
Instalación del controlador macOS®
Paso 1. Paso 3.Paso 2. ( For v10.12 )
● No enchufe el j5create USB™ multi-monitor Adaptador en el equipo hasta que el
conductor esté completamente instalado.
USB Type-C
Dual HDMI Mini Dock
JCD381
Requisitos del sistema
● Puerto disponible USB-C® (USB 3.1 Gen1 tipo CIS recomendado)
● USB PD 2.0 compatible para la carga en sentido ascendente
● Windows® 10 / 8.1 / 8 / 7
● macOS® X v10.8 or later
● CPU: 2.8 GHz Intel® Core™ i3 de doble núcleo
RAM: 2 GB de memoria o más alto
● Un 4K Ultra HD o dos 2K (2048 x 1152 @ 60 Hz)
Reproducción de video a pantalla completa
CPU: Intel® Core™ i7 Quad Core / RAM: memoria de 8 GB o superior
Tarjeta gráfica: Intel® HD 4000 / ATI™ HD 7xxx / NVIDIA® 5XXM o superior
● Si está utilizando un dispositivo USB™ de alta potencia, conecte el adaptador de
corriente tipo C al puerto de suministro de energía JCD381 para garantizar el máximo
rendimiento
● Para garantizar que los archivos se copien por completo, no retire el adaptador de
corriente tipo C mientras Copiando documentos
● Antes de actualizar su sistema operativo, actualice su j5create product driver? primero
para evitar problemas de compatibilidad
Notas
Treiberinstallation bei Windows®
Schritt 1.
Wenn Sie Zugang zum Internet haben, ist es sehr empfehlenswert, dass Sie den neuesten Treiber von
www.j5create.com unter Support & Services herunterladen-scrollen Sie nach unten zu dem Produkt Treiber
und downloaden Sie installieren und den neuesten Treiber für Ihr Betriebssystem. (Hinweis: Wenn möglich
laufen als Administrator)
Schritt 2.
Folgen Sie den Anweisungen, um den Treiber zu installieren. (Möglicherweise haben Sie auf dem lokalen
Computer> Downloads zu klicken und j5UsbDisplayAdapter zu wählen um die Installation zu beginnen).
Schritt 3.
Sobald der Treiber installiert wurde, wählen Sie Ja und Fertig stellen, um den Computer neu zu starten und
und für die vollständige Treiberinstallation. Sobald Sie Ihren Computer neu gestartet wurde, schließen Sie
das j5create USB™ Display Adapter an Ihren Display und dann an Ihren Computer. Jetzt sind Sie bereit, Ihr
j5create USB™ Display Adapter zu verwenden!
Schritt 4. Display Settings
Rechtsklick auf das Symbol in der unteren rechten Seite der Symbolleiste um die Anzeigeeinstellungen
zu öffnen. Wenn der Treiber automatisch installiert, werden Sie ein anderes Symbol sehen .
Schritt 1. Schritt 3.Schritt 2.
● Treiber wird automatisch auf Windows® 10 / 8.1 / 7 installiert
(Plug & Play erfordert Internetzugang )
USB Type-C
Dual HDMI Mini Dock
JCD381
Schritt 1.
Wenn Sie Zugang zum Internet haben, ist es sehr empfehlenswert, dass Sie den
neuesten Treiber von www.j5create.com unter Support & Services herunterladen
-scrollen Sie nach unten zu dem Produkt Treiber downloaden Sie und den neuesten
Treiber für Ihr Betriebssystem. (Hinweis: Wenn Sie Probelme mit dem Heruntladen
haben, müssen Sie gegebenenfalls Ihre Sicherheiteinstellungen auf "Download von
überall" ändern. )
Schritt 2.
Wählen Sie das richtige Betriebssystem für Ihr System und folgen Sie den Anweisun-
gen, um den Treiber zu installieren. (Sie müssen möglicherweise auf Finder>
Downloads klicken und j5UsbDisplayAdapter wählen um dieInstallation zu beginnen).
Für Benutzer v10.12: Klicken Sie auf "OK", wenn Sie das Popup-Fenster sehen. Gehen
Sie zu Sicherheit und Datenschutz> Allgemeines und klicken Sie dann auf "Trotzdem
öffnen ", um den Treiber zu installieren.
Schritt 3.
Wenn die ersten Installation abgeschlossen ist, klicken Sie auf Neustart, um die
Softwareinstallation abzuschließen. Nach dem Neustart des Computers schließen Sie
ihren j5create USB™ Display Adapter an ihren Display und Computer an. . Jetzt sind
Sie bereit, Ihr j5create USB™ Display Adapter zu verwenden!
Schritt 4. Bildschirmeinstellungen
Gehen Sie zum ( ) und dann auf Systemeinstellungen , wählen Sie die Anzeige
oder Bearbeitung Registerkarte für das Bearbeiten der Einstellungen .
macOS® Treiberinstallation
Schritt 1. Schritt 3.Schritt 2. ( For v10.12 )
●
Schließen Sie nicht die j5create USB™ Display Adapter an den Computer, bis der Treiber
vollständig installiert ist.
USB Type-C
Dual HDMI Mini Dock
JCD381
System Anforderungen
● Freien USB-C®-Anschluss (USB™ 3.1 gen1 Typ-CIS empfohlen)
● USB™ PD 2.0 kompatibel für Upstream Aufladen
● Windows®-10 / 8.1 / 8 / 7
● macOS® X v10.8 oder höher
● CPU: Intel® Core™ i3 Dual-Core-Prozessor mit 2.8 GHz
RAM: 2 GB Speicher oder höher
● Ein 4K Ultra HD oder zwei 2K
(2048 x 1152 @ 60 Hz) Vollbild-Video-Wiedergabe
CPU: Intel® Core™ i7 Quad-Core / RAM: 8 GB Speicher oder höher
Grafikkarte : Intel® HD Graphics 4000 /ATI™ HD 7xxx /
NVIDIA® 5XXM oder höher
● Wenn Sie ein leistungsstarkes USB™-Gerät verwenden, schließen Sie den
Typ-C-Netzadapter an den JCD381-Stromversorgungsanschluss, um maximale
Leistung sicherzustellen
● Um zu gewährleisten, dass die Dateien vollständig kopiert werden, entfernen Sie
das Typ-C-Netzteil während des gesamten Vorgangs nicht
● Aktualisieren Sie Ihren j5create-Produkttreiber, bevor Sie Ihr Betriebssystem
aktualisieren um Kompatibilitätsprobleme zu vermeiden
Notas
English
Windows® Driver Installation
macOS® Driver Installation
Step 1. Step 3.Step 2.
Step 1.
If you have internet access it is highly recommended that you download the latest
driver from www.j5create.com under Support & Services –scroll down to the
product’s driver you are installing and download the latest driver for your operating
system. (Note: If possible run as an administrator.)
Step 2.
Follow the prompts to install the driver (you may have to click on My Computer >
downloads and choose j5UsbDisplayAdapter to begin installation).
Step 3.
Once the driver has been installed choose "Yes" and click "Finish" to restart your
computer and complete driver installation. Once your computer has restarted, connect
the j5create USB Display Adapter to your display first and then to your computer. Now
you are ready to use your j5create USB™ Display Adapter!
Step 1. Step 3.Step 2.
Step 1.
If you have internet access it is highly recommended that you download the latest
driver from www.j5create.com under Support & Services –scroll down to the
product’s driver you are installing and download the latest driver for your operating
system. (Note: If you have trouble downloading this driver your security settings may
need to be adjusted to allow for “downloading from anywhere".)
Step 2.
Choose the correct operating system for your system and follow the prompts to
install the driver (you may have to click on Finder > downloads and choose j5UsbDis-
playAdapter to begin installation).
For v10.12 users: When the pop-up window appears click "Ok". Then go to Security
and Privacy > General and click on "Open Anyway" to install the driver.
Step 3.
Once initial installation has completed, click "Restart" to finish installing the software.
After your computer has restarted, connect the j5create USB Display Adapter to your
display first and then to your computer. Now you are ready to use your j5create
USB™ Display Adapter!
Step 4. Display Settings
Go to ( ) and then System Preferences, choose the Display or Arrangement tab to
adjust.
System Requirements
● Available USB-C® port (USB-C® 3.1 Gen1 is recommended)
● USB PD 2.0 compatible for upstream charging
● Windows® 10 / 8.1 / 8 / 7
● macOS® X v10.8 or later
● CPU: Intel® Core™ i3 Dual Core 2.8 GHz
RAM: 2 GB memory or higher
● One 4K Ultra HD or two 2K (2048 x 1152 @ 60 Hz)
Full-screen video playback
CPU: Intel® Core™ i7 Quad Core / RAM: 8 GB memory or higher
Graphics card: Intel® HD Graphics 4000/ ATI™ HD 7xxx/ NVIDIA® 5XXM or higher
Step 4. Display Settings
Windows: Right click on the icon on the lower right-hand side of the toolbar to
open display settings. If your driver automatically installed, you will see a different
icon
( For v10.12 )
●
Driver will automatically install on Windows® 10 / 8.1 / 7
(Plug & Play requires Internet access)
● Do NOT plug the j5create USB-C® Dual HDMI Mini Dock into the computer until
the driver is completely installed.
● If you are using a high-powered USB™ device please attach the Type-C power adapter
to the JCD381 power delivery port to ensure maximum performance
● To ensure files copy completely, do not remove the Type-C power adapter while
copying files
● Before you upgrade your operating system, update your j5create product driver
first to avoid compatibility issues
USB Type-C
Dual HDMI Mini Dock
JCD381
USB Type-C
Dual HDMI Mini Dock
JCD381
Notes
Español Français Deutsch
Windows® Installazione del driver
macOS® Installazione del driver
Passo 1. Passo 3.Passo 2.
Passo 1.
Se si dispone di accesso Internet, si consiglia vivamente di scaricare il driver più
recente dal sito www.j5create.com in Supporto e servizi – scorrere verso il basso sul
driver del prodotto che si sta installando e scaricare il driver più recente per il sistema
operativo. (Nota: Se possibile, eseguire come amministratore)
Passo 2.
Seguire le istruzioni per installare il driver. (Potrebbe essere necessario fare clic
su Computer > Download e selezionare j5UsbDisplayAdapter per avviare l'installazione)
Passo 3.
Una volta installato il driver, selezionare "Sì" e fare clic su "Fine" per riavviare il
computer e completare l'installazione del driver. Una volta riavviato il computer,
collegare la scheda video USB™ 3.0 j5create prima al display e poi al computer. Quindi,
si è pronti per utilizzare la scheda video USB™ j5create!
Passo 1. Passo 3.Passo 2.
Passo 1.
Se si dispone di accesso Internet, si consiglia vivamente di scaricare il driver più
recente dal sito www.j5create.com in Supporto e servizi – scorrere verso il basso sul
driver del prodotto che si sta installando e scaricare il driver più recente per il sistema
operativo. (Nota: In caso di problemi di download del driver, è necessario regolare le
impostazioni di protezione per consentire il "download da ovunque")
Passo 2.
Scegliere il sistema operativo corretto per il proprio sistema e seguire le istruzioni per
installare il driver. (Potrebbe essere necessario fare clic su Finder > Download e
selezionare j5UsbDisplayAdapter per avviare l'installazione) Per utenti v10.12: Fare clic
su "OK" quando appare la finestra popup. Andare su Sicurezza e Privacy > Generali,
quindi fare clic su "Apri comunque" per installare il driver.
Passo 3.
Una volta completata l'installazione, fare clic su "Riavvia" per terminare l'installazione
del software. Una volta riavviato il computer, collegare la scheda video USB™ 3.0
j5create prima al display e poi al computer. Quindi, si è pronti per utilizzare la scheda
video USB™ 3.0 j5create!
Passo 4. Impostazioni di visualizzazione
Andare su ( ), quindi su Preferenze di Sistema. Selezionare la scheda
Monitor o Disposizione per regolare.
Requisiti di sistema
Note
● Porta USB-C® disponibile (si consiglia USB™ 3.1 Gen1 tipo C)
● Compatibile USB™ PD 2.0 per carica upstream
● Windows® 10 / 8.1 / 8 / 7
● macOS® X v10.8 o successivo
● CPU: Intel® Core™ i3 Dual Core™ 2,8 GHz
RAM: 2 GB di memoria o superiore
● Un 4K Ultra HD o due 2K (2048 x 1152 a 60 Hz)
Riproduzione video a schermo intero
CPU: Intel® Core™ i7 Quad Core™ / RAM: 8 GB di memoria o superiore
Scheda video: Intel® HD Graphics 4000/ ATI™ HD 7xxx/
NVIDIA® SXXM o superiore
Passo 4. Impostazioni di visualizzazione
“Windows: Fare clic con il tasto destro sull'icona in basso a destra della
barra degli strumenti per aprire le impostazioni di visualizzazione. Se il driver
viene installato automaticamente, viene visualizzata un'icona differente .
( For v10.12 )
●
Il driver viene installato automaticamente su Windows® 10 / 8.1 / 7
(Plug & Play richiede accesso Internet)
● NON inserire la scheda video USB™ j5create nel computer fino all'installazone
completa del driver
● Se si utilizza un dispositivo USB™ ad alta potenza, collegare l'adattatore di
alimentazione USB-C® alla porta di alimentazione per garantire prestazioni
massime
● Per garantire la copia completa dei file, non rimuovere l'adattatore di
alimentazione USB-C® durante la copia dei file.
● Prima di aggiornare il sistema operativo, aggiornare il driver del prodotto j5create per
evitare problemi di compatibilità
USB Type-C
Dual HDMI Mini Dock
JCD381
USB Type-C
Dual HDMI Mini Dock
JCD381
Italian
快速安裝手冊
繁中文 :
RU : Руководство по быстрой установке
クイックインストールガイド
日本語 :

N L : Beknopte installatiehandleiding
PT : Guia de instalação rápida
SV : Snabbinstallationsguide
Guide D'installation Rapide
Guida rapida all'installazione
F
R
:
Kurzanleitung Für Installation
D
E
:
Quick Installation Guide
E
N
:
Guía De Instalación Rápida
E
S
:
IT :
Limited Warranty
LIMITATION OF WARRANTY
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT
VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE). OTHER THAN AS PERMITTED BY
LAW, J5CREATE DOES NOT EXCLUDE, LIMIT OR SUSPEND OTHER RIGHTS YOU MAY HAVE,
INCLUDING THOSE THAT MAY ARISE FROM THE NONCONFORMITY OF A SALES CONTRACT. FOR
A FULL UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE LAWS OF YOUR
COUNTRY, PROVINCE OR STATE. TO THE EXTENT NOT PROHIBITED BY LAW IN YOUR STATE,
PROVINCE, JURISDICTION OR COUNTRY, THIS WARRANTY AND THE REMEDIES SET FORTH ARE
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER
ORAL, WRITTEN, STATUTORY, EXPRESS OR IMPLIED.
J5CREATE'S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN HARDWARE AND/OR
SOFTWARE IS LIMITED TO REPAIR OR REPLACEMENT AS SET FORTH IN THIS WARRANTY.
J5CREATE’S LIABILITY DOES NOT EXTEND BEYOND THE REMEDIES PROVIDED FOR IN THIS
LIMITED WARRANTY, AND J5CREATE DOES NOT ACCEPT LIABILITY FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES, FOR THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES, FOR
PRODUCTS NOT BEING AVAILABLE FOR USE, OR FOR LOST OR DAMAGED DATA OR SOFTWARE.
J5CREATE DOES NOT WARRANT THAT THE OPERATION OF ANY J5CREATE PRODUCT WILL BE
UNINTERRUPTED OR ERROR FREE.
J5CREATE’S LIABILITY IN ANY SITUATION WILL BE NO MORE THAN THE AMOUNT YOU PAID FOR
THE SPECIFIC PRODUCT THAT IS THE SUBJECT OF A CLAIM. THIS IS THE MAXIMUM AMOUNT
FOR WHICH WE ARE RESPONSIBLE.
EXCEPT FOR THE EXPRESS WARRANTIES CONTAINED IN THIS WARRANTY AND TO THE EXTENT
NOT PROHIBITED BY LAW, J5CREATE DISCLAIMS ALL OTHER WARRANTIES AND CONDITIONS,
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION, WARRAN-
TIES OF MERCHANTABILITY, MERCHANTABLE QUALITY AND FITNESS FOR A PARTICULAR
PURPOSE AND WARRANTIES AND CONDITIONS AGAINST HIDDEN OR LATENT DEFECTS. SOME
STATES, PROVINCES, JURISDICTIONS OR COUNTRIES DO NOT ALLOW DISCLAIMERS OF IMPLIED
WARRANTIES AND CONDITIONS, SO THIS DISCLAIMER MAY NOT APPLY TO YOU.
TO THE EXTENT SUCH WARRANTIES AND CONDITIONS CANNOT BE DISCLAIMED UNDER THE
LAWS OF THE UNITED STATES, CANADA (AND ITS PROVINCES) OR OTHERWISE, J5CREATE LIMITS
THE DURATION AND REMEDIES OF SUCH WARRANTIES AND CONDITIONS TO THE DURATION OF
THIS EXPRESS LIMITED WARRANTY AND, AT J5CREATE'S OPTION, REPAIR OR REPLACEMENT
SERVICES. SOME STATES, PROVINCES, JURISDICTIONS OR COUNTRIES MAY NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY OR CONDITION MAY LAST, SO THE
LIMITATION DESCRIBED ABOVE MAY NOT APPLY TO YOU.
NO WARRANTIES OR CONDITIONS, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE
LIMITED WARRANTY PERIOD HAS EXPIRED. SOME STATES, PROVINCES, JURISDICTIONS OR
COUNTRIES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY OR
CONDITION LASTS, SO THIS LIMITATION MAY NOT APPLY TO YOU.
WARRANTY SUPPORT ONLY APPLIES WHEN THE COVERED PRODUCT IS LOCATED WITHIN THE
COUNTRY IN WHICH J5CREATE ORIGINALLY SOLD THE SYSTEM, AS REFLECTED IN J5CREATE'S
RECORDS. IF YOU NEED SUPPORT FOR THE PRODUCT OUTSIDE OF THE COUNTRY OF ORIGIN
(FOR EXAMPLE, WHILE TRAVELING, OR IF THE SYSTEM HAS BEEN RELOCATED TO A NEW
COUNTRY), THEN J5CREATE MAY OFFER YOU OTHER SUPPORT OPTIONS FOR AN ADDITIONAL
CHARGE.
For more information please visit our website at http://www.j5create.com
Copyright© 2021 j5create. All rights reserved. All trade names are registered trademarks of their
respective owners. Features and specifications are subject to change without notice. Product may
not be exactly as shown in the diagrams..
USB-C, USB-C and USB are trademarks (or registered trademarks) of USB Implementers Forum, Inc., in the U.S. and other countries.
HDMI is a trademark of HDMI Licensing Administrator, Inc., its affiliates or its respective owners, registered or used in many
jurisdictions worldwide. Microsoft, Windows are trademarks of Microsoft Corp., its affiliates or its respective owners, registered or
used in many jurisdictions worldwide. macOS is a trademark of Apple Inc., its affiliates or its respective owners, registered or used in
many jurisdictions worldwide. Intel and Intel Core are trademarks of Intel Corporation, its affiliates or its respective owners,
registered or used in many jurisdictions worldwide. ATI is a trademark of Advanced Micro Devices, Inc., its affiliates or its respective
owners, registered or used in many jurisdictions worldwide. NVIDIA is a trademark of NVIDIA Corporation, its affiliates or its
respective owners,registered or used in many jurisdictions worldwide. Other trademarks and trade names may be used in this
document to refer to either the entities claiming themarks and/or names or their products and are the property of their respective
owners. All company, product and service names used are for identificationpurposes only. Use of these names, logos, and brands
does not imply endorsement. We disclaim any interest in the marks of others.
j5create offers a limited 2-year warranty. User’s wear & tear damage is not included. The user shall
call or email j5create customer service with the defect information of the product and obtain a
return authorization number. Users are responsible for one-way return freight cost and we will take
care of one-way freight back. In order to obtain a return authorization number, users should have
the following information handy when calling or emailing the service team:
(i) a copy of the original purchase invoice to verify your warranty
(ii) a product serial number
(iii) a description of the problem
(iv) customer’s name, address, and telephone number
j5create does not warrant that the operation of the product will be uninterrupted or error-free.
j5create is not responsible for damage arising from failure to follow instructions relating to the
product’s use. This warranty does not apply to: (a) consumable parts, unless damage has occurred
due to a defect in materials or workmanship; (b) cosmetic damage, including but not limited to
scratches, dents, and broken plastic on ports; (c) damage caused by use with non-j5create
products; (d) damage caused by natural disasters; (e) damage caused by human misuse (lost,
accident, abuse, misuse or other external causes); (f) damage caused by operating the product
outside the permitted or intended uses described by j5create; (g) damage caused by service
(including upgrades and expansions) performed by anyone who is not a representative of j5create
or a j5create Authorized Service Provider; (h) a product or part that has been modified to alter
functionality or capability without the written permission of j5create; or (i) if any j5create serial
number on the product has been removed or defaced. If such a situation occurs, j5create will
calculate the cost of materials and repair for your reference. This warranty is given by j5create in
lieu of any other warranties expressed or implied.