Specifications

615 System Manual

Version 1.0 March 21, 2010

5: The default values for the Interface Configuration are what the J2 UPS uses, therefore

just click Finish.

6: When returned to the Power Options Properties window, click Apply to save the

configuration. It will take a number of seconds to configure. Once done the Details

should show Manufacturer: Generic and Model: Custom and the UPS and driver should

be working. This can be quickly tested by removing the AC power to the unit. If

everything is working, the Current power source: should change to On Battery.

You may now exit the control panel, the UPS configuration is complete.