Specifications

615 System Manual
Version 1.0 March 21, 2010
33
Customer Display Option
Connecting the Cable for a J2 615/580 customer display
Cablemustbefittedcorrectly.Theend
withtheshrinksleevegoesintothe
display,theotherendtoCOM3orCOM4.
NormallyCOM4powerisalreadyenabled
onthatport.

Dip Switch and Software Setting
Command Type Selection
SW1 SW2 SW3 Command Type Demo Mode Support Default
ON ON ON POS7300 No
＊
OFF ON ON EPSON ESC/POS Yes
ON OFF ON ADM 787/ ADM 788 No
OFF OFF ON DSP800 Yes
ON ON OFF AEDEX/ EMAX No
OFF ON OFF UTC/P No
ON OFF OFF UTC/S No
OFF OFF OFF CD5220 Yes
Baud Rate Selection
SW8 SW9 Baud Rate (bps) Default
ON ON 4800
OFF ON 9600
＊
ON OFF 19200
OFF OFF 38400
Parity Check Selection
SW10 Parity Check Default
ON None-parity
＊
OFF Even-parity