Specifications

615 System Manual
Version 1.0 March 21, 2010
10
I/O Ports
The J2 615 has an integrated design with all the electronics “in the head”. I/O ports are
accessible in the cable well at the bottom of the unit (please see below):
,
Atom Processor
The J2 615 uses the new Intel Atom N270 processor which only requires 2.5 watts of
power. With a speed of 1.6GHz, a 512MB second level cache as well as an FSB speed of
533MHz, the 615 provides the performance necessary for thin as well as most thick POS
software applications. Used in conjunction with the Intel 94GSE chipset this processor
provides excellent video performance and is more than capable of running a secondary
monitor with full screen video at high resolution in addition to running a POS
application.
System Memory
The J2 615 comes standard with 1GB 533MHz of memory. The system has one memory
socket and uses SO-DIMM DDR2 533MHz type memory. The unit supports a maximum
of 2GB of memory.
On /Off Button
The On/Off button is located in the cable well, as shown above. This button is located
especially to prevent accidental powering down by the user. The function of the button
can be controlled by the OS; should the J2 615 hang for some reason, note that it can
always be powered off by holding the On /Off button in for six seconds.
The J2 615 also supports the following: Restore On AC power loss, Wake On LAN, and
Wake On RTC alarm features control the system’s power up. Please see the BIOS setup
section of this manual as well as the J2 white paper entitled “Reducing Your Carbon
Footprint in the POS Environment”.
DC-IN
LAN
Audio Out USB
Cash Drawer
COM 1 2, 3, 4
VGA
ON/OFF BUTTON